Search results

Ignore this post, duped the above!

SparkyMarka, great recommendation on the Eaton M12. Just wanted to check as it is a normally closed (NC) sensor, circuit would need a resistor in series at the base connection (terminal 3 or 4) and do you wire as "auto-reset" (i.e. not latched)? Aware wiring might vary for various panels though...

I had something similar, see here how I fixed but your error message looks slightly different. https://www.diynot.com/diy/threads/galaxy-flex-20-gprs-line-failcom4.602285/#post-5379358

Thank you again for the recommendation, fitted yesterday. What I noticed is the sensor is normally closed (NC). Initially I didn't fit a resistor and was sharing a zone with a normally open (NO) PA module. Was causing issues with the resistance reading, so moved it to it's own zone and added a...

Seems there has been a rebrand/takeover, M12 product now sold under the "Eaton" brand. Picked once up from ADI today, just under £35 Inc Vat. Thanks again!

Many thanks Sparkymarka, this model definitely looks like it is up to the job with the ability to sense the slow build up of dust and a higher temp setting can be set (although I think the loft should not reach above 60 degrees, I'd still opt for 77 so not to risk false alerts). Once a year when...

Been researching for some time but there don't seem to be any definitive answers out there for this one. I even contacted Texecom directly and they didn't want to give advice, instead stating I should ask an installer. In short, I have a unvented hot water cylinder in the loft, plus two in-line...

Hi, Aware my hardware only supports version 1 firmware. I have checked using the keypad and the sticker on the hardware both confirm v1.12. Googling I think there could be at least v1.14 available. Does anyone know what is the newest v1 firmware version actually is, can it be downloaded and...

GalaxyGuy appreciate the tips, logged in as engineer today and sent two test messages (56.4.05) but unfortunately didn't clear the fault. However, for any other v1 Flex owners with the same issue, just switch the option in the image to off. My guess is the EE network temporary went down (maybe...

Thank you for the quick response GalaxyGuy and very appropriate username! To confirm it is the GPRS module GX (A070-00-01) and is programmed to sms message faults and alarms to two mobile phones. Thanks for the note on 2 successful transmissions to clear, I will try that, but baffling as...

Hi all, I blame the long cold snap, but out of the blue after 10 years of faultless service, my Flex 20 with a GPRS module has thrown a dreaded +Line Failcom4 unclearable fault. I've tried an engineer reset (51.17.1) and a shutdown (51.17.5), unplug module, restart, shutdown and plug back in...

Aware this thread is old but had the exact same crack/bang not long after water was drawn (typically after 2 concurrent showers). As my Gledhill tank is in the loft above my bedroom was easy to hear and time the noises. The original installer reviewed and could not identify the cause. However...