Search results

You guys are correct - I found another picture somewhere that confirmed the spring should sit on the little plastic sticky out bit. It has cracked so that is the source of the problem. Time to break out the glue!

Thanks for the responses. I think it is stuck on the high speed as I can't notice an increase when under demand and it seems a bit much at idle. What's likely to the cause of this fault?

The door catch on my very old White Knight CL737 recently stopped holding the door closed. The door handle is flappy as though the spring isn't doing it's job. I've bought a new spring kit but I can't figure out what I need to do to get this to work - any ideas what is wrong in the photo...

Hi, Should the fan be running constantly on my Vokera Excel 80SP? If not, what is likely to be the cause of this? Thanks, Iain

Hi, I have a felt roof over a large section of my house. The felt has been on it for years and years but the recent advice of some roofers was if it ain't broke don't fix it! By and large it isn't broke however a bit of the felt on the edge of the roof had become brittle and snapped away...

Thanks Ian. PM'd.

Ian, I was referring to the three dials in the bottom left of this picture (found on the net as I'm missing the dials) which control boiler setting, water temp and heating temp. Let me know if you have those and I will gladly buy them.

It's working! I pressed various buttons on the digital timer and eventually it just fired up. Perhaps the power was turned off to the boiler by a power cut which reset the timer? However, I don't think the power going off would cause a drop in pressure? I'll need to monitor that. Ian, my...

Hi, No, I didn't turn off the power. I suppose there could have been a power cut whilst I was away. I have emailed you separately, Danny, as you helped me out earlier this year with a boiler service. Thought I would post on here in case there was a simple fix. Iain

I returned home last night from a week away and the pressure in the boiler was down to about 0.3bar and the pilot was off. I have increased the cold pressure to c.1.5bar and lit the pilot. The main burner will now come on for hot water (i.e. hot water working fine) but not for heating? Are...