Search results

Hello guys, Can anyone recommend a screeder in East Sussex. Looking for around 45 SQM room. Thanks in advance James

That's a real shame to hear that. I've used them quite a few times this year for materials for two extensions and they've been good. Hope you get it sorted. J

Hello guys, I've checked out http://www.planningportal.gov.uk/permission/commonprojects/doorswindows/ It states - Width and Height - Either of these are not to be any less than 450mm - Clear Openable Area - No less than 0.33m² - Cill height - No less than 800mm and no more...

Have you checked the cavities? Old victorian houses can have problems with cavities filled up causing a bridge. I cleared out the cavities around the parimeter of my house. You couldn't imagine how much came out but I'm pleased I did it.

I'm getting what your saying. Sounds like a bloody nightmare to me. It's a lean to roof and not a pitched one. BC haven't mentioned anything so I'm not quite sure what he will say. I'm looking around my area at all the lean to extensions and thinking I'll be damned if they've got bloody cavity...

The trouble being, if this tray was above the lintel then it would seep out of the wall above the lintel, which is inside the extension. Ideally, I need a cavity tray that angles left and right so any drops fall into the cavity left and right of the doorway.

So I did, typo :)

Hello guys, I'm currently building a small lean to extension on the rear of my house. The lead flashing of the lean to roof goes right upto and under a large Victorian window. 1 meter down from that window is the opening through the cavity through to the new extension. I'm...

They are ceramics :|

Well, I've started to get some slight mould lines on the edges of the tiles in some spots over the bath. I think this because too much grout got washed out when applying. in areas where the grout is all but flush with the tile it's been fine. After application, you can see the was bead on...

It's as a base coat. Basically I had some problems with my cavity insulation, sorted it but BC want a silicone render as a base coat on one internal wall as belt and braces. I was talking to a mate of mine last night who uses K-Rend and suggested that might do the job. Do you think a...

Hello guys, Can anyone recommend a silicone internal render? I've been asked to use it on one wall by BC. Is Sika 1 what I'm after? Maybe something similar as used when tanking basements? Thanks J

well two core holes in as well as the ducting. Now just to buy the fans :) Thanks Guys J

Hello Guys, thank you for your responses. The run from the wet room is about 2300mm from the hole in the ceiling to the exist point. The run from the utility fan to exit is about 5mm as the fan will sit next to the wall. What I was trying to avoid was two vents on the outside wall...

Moved

Hello guys, I need to install an extractor fan into a new wet room, and one into the utility room next door. The 4" duct will go right over the utility room. Is it possible to use To vent into a single exit point, or will one just blow into another? Thanks J

Hello guys, Still using less2build a lot! Spot on or customer service and price. Just ordered some large 5200mm catnic lintels, couldn't have been more helpful especially as it was a made to measure size, and the fact I had already ordered a 3900mm which they cancelled for me as the...

Okay thanks for that.

Sorry guys, forgot to ask, will lead 3 be suitable for flashing?

My old man lives in heathfield, right on the top of a hill. WHen those NE come in, my god!