Search results

No it’s a diy in my house I’ve installed it using the red fire alarm cable but was gonna add another bell on separate circuit but using alarm wire thanks

This one

Would it be ok to use burglar alarm cable on a fire alarm system meaning the fire alarm is 24v and alarm is 12v thanks

Installed texecom 48 seem to be understanding it now (programme etc)but it seems a bit slow for example if I press the PA button may be a second or two before sounders start any other alarm I’ve had it’s instant thanks

Depends how old if it’s live and you can get to it open bell box and disconnect the battery inside .

If you are not using the system power it down Remove power Remove batt If you have a live bell outside do this in the daytime let the batt die in the bell box

On keypad it should say alert put in your code and use the arrow and it should tell you the problem

I’m I right in connecting speech dialler to texecom 48 Fire -com1 Pa-com2 Intruder -com3 And would I need to program the coms or would they already be set up thanks

Sorted the tag one user 1 program time lock it seems to reset now without going into service but still don’t have to scroll through events to reset ?

Think I completely messed programming up ok so yesterday was only using zone one to test Today when I’ve powered back up zone one would trigger and let me turn off (but don’t have to scroll through) to reset However when I go through zone 1 on entry and walk through zone 3 it triggers alarm...

They are the ones we use now on galaxy g2-20

Ye

Cheers for that do you know if there’s anything on the banner goes off when armed and do these tags work with this system tried but not getting anywhere it says present tag now

I’m programming the above and got a bit stuck The entry and exit timer seems to be on final door close is there somewhere in the program that will just do the time and also is there somewhere a program to turn off the banner when set so I know it’s set thanks

Ok so I’ve ended up with a telecom 48 metal with a prox keypad ,well it’s on its way . So reading through online instruction I’ve to wire it all up then power up with battery then hold button on inside panel , then mains power Then program is this correct or can I program on kitchen table then...

What do the letters mean for example Telecom caa- 48 Telecom cab-48

What do the letters mean say telecom -caa And telecom -cab

I’ve tried repair said something along the lines disc error so tried to reinstall windows 10 still does the same as b4 Then tried the command chkdsk / f and /r but that saying can’t run on this volume write protected.

Ye he has checked space and is showing there is when we load windows 10 could it be the hard drive ? It seems to load windows (it says now needs to restart to continue) so when we restart it goes back to windows logo and circle and just seems to stick there .

Would that not work new to this stuff ?