- Joined
- 12 Apr 2020
- Messages
- 3
- Reaction score
- 0
- Country
Hi guys, hope you can help me as being in the middle of COVID-19 means professional help is hard to come by.
I moved into a house last June and it had an ADT fitted Honeywell Galaxy 2 Series alarm. After speaking to ADT I decided they weren't a company I wanted anything to do with and simply left the alarm in a dormant state. Around 3 months ago I removed from all the outside doors the breakers that weren't doing anything anymore. I know the user code from the previous owners and had to enter that after doing so but there's been no issues for the past 9 months.
In the last few days however at around 5pm until about 8am I get a intermittent beep every 30 seconds or so. It's quite piercing so is easily loud enough to stop you getting to sleep. I'm not aware that anything has changed so have no idea why it's started doing this now.
According to this installation manual http://www.strathand.com/cdata/24498/docs/1758647_2.pdf there's an option 51 = Parameters where I should be able to remove the audio part of the alert so whilst I wait to try and get a proper local engineer out to help me I should be able to at least silence the beeps. Unfortunately I don't have engineer codes and am stuck!
Can anyone help?
Thanks
Rob
I moved into a house last June and it had an ADT fitted Honeywell Galaxy 2 Series alarm. After speaking to ADT I decided they weren't a company I wanted anything to do with and simply left the alarm in a dormant state. Around 3 months ago I removed from all the outside doors the breakers that weren't doing anything anymore. I know the user code from the previous owners and had to enter that after doing so but there's been no issues for the past 9 months.
In the last few days however at around 5pm until about 8am I get a intermittent beep every 30 seconds or so. It's quite piercing so is easily loud enough to stop you getting to sleep. I'm not aware that anything has changed so have no idea why it's started doing this now.
According to this installation manual http://www.strathand.com/cdata/24498/docs/1758647_2.pdf there's an option 51 = Parameters where I should be able to remove the audio part of the alert so whilst I wait to try and get a proper local engineer out to help me I should be able to at least silence the beeps. Unfortunately I don't have engineer codes and am stuck!
Can anyone help?
Thanks
Rob