Search results

Hi all. Does anyone know the best way to select the right Suntec pump in order to replace a Danfoss BFP 41 L3 No. 071N1206 please? It's on a Worcester Danesmoor 12/14

Finally got it off with a giant spanner haha. How do you tell if it needs replacing or not? It's cleaned up OK.

Well to answer my own previous question I now have access to the nozzle but my god will it not come loose. Its that tight I'm afraid of snapping something! Won't budge in the slightest.

Thanks for all your advice. I've got it out but can't see how I get to the nozzle with a spanner? Thoughts?

Pics

Which bit is the nozzle? I'll give that a try unless there is something specific that could be causing the smoke out the extractor. Cheers

Well I cleaned the photo cell which didn't look dirty anyway really. Ran the boiler which ran for a longer twenty odd minutes but didn't sound as smooth at the main extractor outside and it emitted small amounts of smoke. It locked out again around the twenty min mark.

Thanks for your reply. I can't see any bowl filter at the outside fuel tank but the photo cell plug is wet with fuel but that might just be off me running off a bit fuel to check there was no air in the system. It's probably due a service and clean but wanted to get it working before he came...

I know there has been previous posts regarding this but I have changed to a new solenoid and bled the valve. This got the boiler running again for about a fortnight to a month and now back to lock out every five minutes. I've took the filter out and noticed quite a bit debris in there but...

Yeah I had already used a rubber washer and the lever for the dial from the previous one. I think I have fixed it by turning down the pressure temperature dial which stopped the flow. Shower is now working like it should but not sure why??? Happy days! Thanks for all the replies

I have just replaced the pilot valve on our Mira essentials shower as advised on here however the previous leak has now stopped but when you use the power dial it will not turn off. Had to turn off our stop cock! After removal of pilot valve it would appear that only one microswitch is being...

Any ideas how difficult this would be to remove and refit a new spare pilot valve? Thanks again

much appreciated for both your replies

Can anyone suggest if anything can be done to save our shower without replacing please? Shower power light went off on front and after taking the front case off there is a small leak coming from the white top part on the black central area near where it has "INLET" printed on the back face...

thanks jobsworth :roll:

Cheers fella

Got a similar problem to original poster. I am replacing a ceiling rose with a new modern type spot light bar. Made not of cables coming out where I have x2 black neutrals, x3 red loop ins, x1 Black live switch and earths. Problem is that terminal present in new light fitting have only two...

Hi there thanks for your response. I have tried what you say with one black in neutral and one in switched terminal nothing at all happened, then switched the two blacks around and the power is on permanently now. Should i put one of my red lives into the switched live and pair the switched...