Search results

If I can help you with any computer stuff let me know.

Very Friendly and help Person.

Good morning John,just to let you know how its going now,I have the boiler starting now pumping oil and lighting then cuts off after a few seconds. When I fited the pump back this morning and still not getting oil I adjusted the screw holding the spring in the solenoid valve and the less...

Hi John,another day at this boiler. I have taken some photos off the pump.I can email them to you.(what is your email) PM ME. I striped the pump last night and it was very clean no sludge or anything,I took the solenoid shaft off to see if i could see anything that was maybe jamming it all i...

Hi again jOHN. This unit has the fan to the lefhand side then the motor in the middle and the pump next.(FAN.MOTOR.PUMP. i took the pump out and the Plastic coupling is like new ,and the pump turns freely.Unless the solenoid valve has stuck closed.The pump would not go back into position...

I am not sure then about the coil,I thought it would magnetize when switching.there is oil at the primer side of pump ok,and pump Is turning,well the fan is turning.

hi again John. Should the Solenoid coil not magnetize ,I removed it from the shaft and held a screwdriver inside it did not.I checked the Kohms on the coil connection and reads approx .100 when dark and .002 when shown to the light.

Yes oil at the pump and pressure is good when I loosen the pressure screw. Should the Solenoid coil not magnetize ,I removed it from the shaft and held a screwdriver inside it did not.I checked the Kohms on the coil connection and reads approx .100 when dark and .002 when shown to the light.

Hi John,I fitted a new coil and still no luck,I opened the pressure screw a little and oil is coming into the pump,I am lost now ,could it be the Satronic TF830/B control box,or the photo cell.Is there anyway for me to check.? How do i check the resistane of the photocell,what do i set the...

when i attach the metre to the coil socket the voltage goes up and down its not a content reading. I can not find a solenoid coil at www.heating-parts.co.uk. Ps. I REMOVED the pump to check and all looks ok the coupling is like new,and it turns freely.Do you think its a faulty coil,or...

Hi al. I have a Trianco Boiler its not getting oil from the pump,I have checked the line to the pump and its fine. Its a Suntec pump and coil,I dont hear the coil click when I start the boiler from the reset button. How can I check if its the coil or the pump,how do I check the power...

Cheers guys,I looked at the break lights ,I could not see anything faulty,but I removed the bulbs and then refitted them,all seems to be working fine,maybe just a loose bulb. Many thanks to both of you.

Hi all,mY SEAT LEON 2001 has started playing up when the head lights are off and I put my foot on the brakes the left head light comes on,and when I am driving with the head lights after a few mins a fault light comes on the dash,I looked it up and it says it a exhilarater pedal or cable...

Cheers guys for all your help,We have hot water. I could not get the top off the sunvic,so I sprayed a little WD40 into the pin position and tapped with the handle of a screwdriver,and left over night,hey presto its working. I can't Thank you guys enough for all your help,My electric bill is...

Yes its like the one on the left of the picture,so is there a screw at the bottom of the white plastic turning knob,there is a cap at the top which i removed but it did not help me. Just like to thank all you Guys for helping me.

I have tried to work at the valve with the numbers 1 to 5 its called SUNVIC,I do have asmall tank in the loft,what should i check with it apartfrom it having water in it. The SUNVIC valve ,I used a small knife to take the top cap off thinking that I would be able to take it apart,but I cant...

Hi ,thanks for your reply,no the boiler does not have a auto valve it has a standard brass valve with red circle grip adjustment its fitted on a 3/4 inch brass pipe that is at middle height on the boiler the the pipe goes through the wall into my house,it is always hot both sides of the valve...

Hi ,thanks for your reply,no the boiler does not have a auto valve it has a standard brass valve with red circle grip adjustment its fitted on a 3/4 inch brass pipe that is at middle height on the boiler the the pipe goes through the wall into my house,it is always hot both sides of the valve...

Hi all,This is my first post,My oil central heating has stoped heating my hot water it heats the Rads perfectly but no more hot water,a friend told me to turn the valve at the boiler a little I have turned and turned but still no hot water.Now i am not sure what position the valve was at before...