Search results

will an opening already be present from the loft as the soffit has a hole?

The old soil pipe used to go through the soffit does this mean I could vent through here?

Yes

Would it be running 24/7 or would it wire up with the existing fan? Would the centrifugal fan be in the loft in between the exit and the pipes leading to the extractor fan? Or would it simply replace the existing extractor fan? Approximate costs?

What are centrifugal fans?

I do have open vent system but the FE not getting hot. One extractor has been vented there since 2000 and the other since 2017 and obviously the problems started last Oct

Hi all, I've had a long term heating and hot water issue as my wiring centre is in the loft and the wiring does become oxidised and the hot water and heating intermittently come on. @Johntheo5 It has finally been diagnosed there's too much moisture in the loft. I have two extractor fans going...

Kitchen lights and sockets work, so am guessing due to the dogs dinner of the living room lights wiring this is the cause...

Tested with multimeter. Only get 240v when prongs in middle and bottom hole. I'm guessing that's the middle one is earth and top one is neutral?

Rcd at fuse board. One rooms lights don't work. I'm guessing they're loose.

Unfortunately I don't know I wasn't at home at the time. It's happened before but it worked. Power is going to the controls but there's something obviously wrong either at the controls...

Yes neutral is there. It worked fine previously. Would there be a fuse somewhere??

Hi all some internal lights were removed and the person that did it turned off all the electric rather than the respective lighting circuits. Now the kitchen extractor fan doesn't work including the lights on the fan. However there is power coming into it as tested by the voltage stick. Any...

Nothing at all

Hahaha how you doing? It's on constant curve highest setting. Yes magnetic filter cleaned a few times and last time I added inhibitor to it and that immediately helped this new issue.

A new problem. Heat only boiler, that dial does nothing

Boiler does make a water gulping sound when I switch between HW and CH and some of the pipes making clanging noise too but 3 port valve is very far from the boiler up in the loft

Hi all the vaillant ecotec 438 is overheating when HW is on HW only - If flow set to 60c it goes up to 80c It's fine on CH When both CH and HW on together it will go up an extra 10c Here's a video with it on HW only

With your suggestion that does mean a ether net cable being plugged into main router and then into another extender somewhere in the house I've changed the names on the mesh, regardless of having same name the device would still be connected to the access point and then won't automatically...

Only issue with this brand is that setup is via an app. And if app becomes useless then you're screwed. Doesn't seem to have a web based setup.