Search results

Hi there, Is it possible to remount the mullion on the slave door on a set of upvc french doors.as ours is not flush with the slave door... :? :?

Yes it was.... :D Hopefuly that wil cure it...

Trap is clean bud, Got the sink overflow in soak now...so will see how that goes..

No bud, Only when water is running down the sink.... :(

No soory bud, I havent.. :(

Both hoses reach the sink ok....Going to change all the pipework as we have a really bad smell from the sink..I was thinking it wes because the drain hoses for the DW and Washer were to high and not draining properly??

Yes that was the thought....Is that ok to have 2 traps...??

Am I wright in thinking then they can go after the trap under the sink if they have there own u bend/Trap..??

Cheers for the reply bud...Just wat I needed to know.. :D

Have to go before the sink U bend, or can they go after the U bend if they have there own U bend.???

cheers for all the replys guys. Lots of things there to look at and try..

Its only the kitchen tap that smells guys, all the other hot taps are ok.. Here is a pic of the traps, the one on the left is the washing machine the one on the right is the dishwasher

Cheers for the replys guys, Will give those last 2 suggestions a go and let you know how I get on..

No bud, I thought it was the washer or dishwasher at first. Then I changed the position of the outlet pipes and the smell went for a short time.. Now the smell has returned, but only when the hot tap is/has run.?? Hope this helps..

Hi there guys, I hope you can help me out here, when the hot top is run we get a smell of rotten eggs.?? Any ideas.??

Just a quick update guys, Thanks alot for all your advice it wnt like a dream.. :mrgreen: :mrgreen:

Thanks for all the replys guys....I will be doing the work on friday afternoon so if i need any more help I will sure to post then..... Thanks for the tip on bleeding the pump :mrgreen: :mrgreen: Lee

Hi there, I need to remove a rad to install some french doors. I know how to drain the heating system from reading the wiki on here, turn of water, drain rads.... Q.1 How do you refill the system,, is it just a case of turning the water back on and refiling the system from the expansion tank in...

Dont know if there is a section for this, but here goes.. The glass roof has started to slip down and i am not sure how to get it back in place.... Any ideas anyone..??

Thanks for the reply bud....will have a look at those products :mrgreen: