Search results

doubt the panels are available the kitchen's 13 years old...never the less I'll check it out. I'll give hotpoint a call, might as well. :) thanks for your help. do you understand what '115 ÷ 137, 5' means?

well, they got back to me with an answer, but it was the same answer as the on the brochure gave me. see below. dimensions as on hotpoint's site. the brochure on semi-intergrated units says the total height is between '820-900' and that the control panel is '115 ÷ 137, 5' which i don't...

hello I'm after a new dishwasher and have the Hotpoint bfv620 in mind. The thing is with this one is that it's semi intergrated so it'll need to be the same dimensions on the front to accommodate the existing decor panel from my kitchen. are the from decor plate spaces on these semi...

got a reply to my e-mail to electrolux: Thank you for your email I can confirm that this appliance does work on a 13amp fuse as per the brochure. The paragraph in the instruction book is under review with the factory as it is incorrect. Please accept my apologies for any...

thanks for the reply :) I think I'll go with the mk 20A DP one on the top link, then :) cheers.

Hi Can anyone tell me what the gap is on a typical 20A switch is? I'm looking at: http://www.screwfix.com/app/sfd/cat/pro.jsp?id=44956 but MK's specs aren't explicit on the pole gap of this particular switch, however they do say that this switch...

hi yes, that's the thread i was referring to in my original post :) crafty. i just used the plug from the original oven and plugged the thing in :) i have one of those Plug-In Mains Power and Energy Monitor things and it draws about 3050 tops with the light and all the fans on...

hi thanks for the replies :) crafty, so you're saying at the back of the hob istself there should be a connector for a cooker outlet (like a pass through?) wire an unswitched socket to the hob via 6mm cable and use the existing 2.5mm three core flex to connect the new oven to the 13amp...

Hello. There's a thread lower down regarding cooker wiring combinations i didn't want to hijack his thread, so i thought I'd start my own. :) The situation: our current oven doesn't work properly so i decided to replace it. The current oven is a Neff BAP227 2.8KW single oven. It is...