Search results

  1. Tony Morse

    Gurgling drains plug holes

    We can't find a drain that shows that happening i have put pictures of all the drains we have in front and back garden, we are starting to think that the other drain has been covered somewhere else and we don't know where to look, there are no visible signs of any other drains, anywhere thanks Andy
  2. Tony Morse

    Gurgling drains plug holes

    Manholes are not blocked i have ran a hose pipe down both of them and the water goes away it doesn't block, could it be a faulty Air vent valve ? thanks
  3. Tony Morse

    Gurgling drains plug holes

    Ok, i will check, could it be my drain, or somebody else's,t hanks
  4. Tony Morse

    Gurgling drains plug holes

    Any idea where i have went wrong?? thanks
  5. Tony Morse

    Gurgling drains plug holes

    Hi Andy, i can't understand why i would have a blockage, it was running bath water fine in this pipe, i have since installed an upstairs toilet, and now it's causing problems, could it be something else perhaps, thanks
  6. Tony Morse

    Gurgling drains plug holes

    Hi, i have just installed me new bathroom, got around to connecting the toilet pipe water, hot and cold, sorted out a leak from the bottom of the toilet, it was an iffy washer, anyway, i connected it all up and pulled the flush, waited and pulled the flush again, i check the back of the toilet...
  7. Tony Morse

    Radiator pipe connection fitting

    Well, i would of thought so too, time will tell, i will fit one of these fittings, and see how it goes, and let you know.
  8. Tony Morse

    Radiator pipe connection fitting

    Just been watching this guy, my pipe is grey inside and white on the outside, not saying it's the same, just assuming, he showes a brass compression fitting suitable for connection, if you don't have thr proper gun to use, like on the original instalation, .
  9. Tony Morse

    Radiator pipe connection fitting

    Thanks, i did email Uponour yesterday, to ask if they sold connectors for this job, and explaining what i was trying to do, but haven't got a reply back, i will phone them in a minute, see what they say, i do hope it's ok, in heinsight, i should of just rang them first before ordering off ebay...
  10. Tony Morse

    Radiator pipe connection fitting

    You say it's not PEX. will it matter if the adapters i have ordered are for PEX? ADAPTER REDUCER 16mm PEX/ALU/PEX PIPE - 15mm COMPRESSION COPPER, and wonder why we would use that size? other than to confomr with EU standards, i like feet and inches, not trying to work out CM and MM.
  11. Tony Morse

    Radiator pipe connection fitting

    I don't think we'll ever know, unless we got to speak to installers who fitted it, and know the reasons behind it, i did read a little about it online, it's meant to be a very robust system, and suitable for heating, and drinking water, may be the company had loads of this type of pipe from...
  12. Tony Morse

    Radiator pipe connection fitting

    Thanks Madrab, i have just ordered some off ebay, £9 for a two pack, 16mm plastic to 15mm copper end, so i'll go 16mm UFH to 15mm copper, to 15mm GPSpeedfit, what a malarky, typical of the council, why is they can never do anything right, and they have got far worse these days, looks like i'm...
  13. Tony Morse

    Radiator pipe connection fitting

    Hi Madrab, it was the council that had contractors install a new heating system in our house before we bought it, i have no idea about any of it, we do have rads, and the main feeds are a bigger pipe, looks like the sizes you mention, so this pipe is definitely 16mm? do you think they do plaric...
  14. Tony Morse

    Radiator pipe connection fitting

    i have found this, https://www.ebay.co.uk/itm/ADAPTER-REDUCER-16mm-BARRIER-PIPE-15mm-COMPRESSION-COPPER-PLASTIC-PACK-OF-2-/321930588167 is this what i need? cheers
  15. Tony Morse

    Radiator pipe connection fitting

    Not the whole system, some of it is even bigger, so 1mm difference, is there a way around this? adatpter? thanks
  16. Tony Morse

    Radiator pipe connection fitting

    Hi, i have this pipe and connection fitting on my radiator upstairs which i want to move, make it longer, so i have bought some GPSPEEDFIT pipe and fitting, o and a pipe cutter, proper one, when i come back from buying what i needed, the pipe looked a little bigger, weather this is internal and...
  17. Tony Morse

    Looking for advice Good bad or ugly

    Just thought that i would post the latest upto date pictures, not far of completion for the outside now, the last part i ordered only come yesterday, so have only just done it, i bedded the long radious in with cement as you said, and bedded in the Gulley, and covered the pipes in full, with Pea...
  18. Tony Morse

    Looking for advice Good bad or ugly

    Can i ask what you think about this access attachement, it narrows so would prefure the other type, does it matter which one i use? thanks
  19. Tony Morse

    soil pipe bedding and back fill

    Thanks Hugh, appreciate all the help. thanks
  20. Tony Morse

    Pipe config or Boss direct into pipe ???

    Thanks, that's much appreciated.
Back
Top