Search results

  1. J

    Wiring 2 way switch help

    the other is for a light in the loft
  2. J

    Wiring 2 way switch help

    hall and landing light are 2 way...gonna get a spark out i think to sort it...thanks for all the help
  3. J

    Wiring 2 way switch help

    got nothing upstairs at all, had the odd flicker when trying wires in different ways
  4. J

    Wiring 2 way switch help

    Looking at the back of the switch the left hand side is the top landing switch
  5. J

    Wiring 2 way switch help

    I used a neon screwdriver ( dont have multi meter )
  6. J

    Wiring 2 way switch help

    This is the top landing switch
  7. J

    Wiring 2 way switch help

    ok..i removed the red cable from the right hand side L2 ( from the back ) and the hall light still switches on and off
  8. J

    Wiring 2 way switch help

    yes there is another switch on the landing..but i haven't touched that one yet
  9. J

    Wiring 2 way switch help

    Looking at the picture the right hand section from the back of the switch operates the hall light and the other is the landing
  10. J

    Wiring 2 way switch help

    PrenticeBoyofDerry This combination has the hall light working
  11. J

    Wiring 2 way switch help

    Managed to find the permanent live and join it over to the other com, i have tried several combinations for the others and can get the hall light on but no the landing...anymore pointers as to where to put the other wires..
  12. J

    Wiring 2 way switch help

    Well i shouldn't of messed but i did, the back of the switch is different from the old switch so can anyone advise me on what wires to where please...
  13. J

    2 New Rads Waring Up when Water On

    Moved in my house a year ago and got a plumber to fit 2 new rads in the extension, he fitted them with TRV's...last week i had a few trv's removed as i'm not a fan of them and every time the water is heating, the 2 new rads and none of the others get hot..? They both work fine with the heating...
  14. J

    Cement board

    Hello all. I currently have external stone cladding on the front of my house which i intend to cover by battening and then fixing cement board. Can i paint directly onto the cement board if i fill the joints..? would a good quality masonary paint be all i need..?
  15. J

    Render over uneven surface

    Looking for some advice on rendering, i have moved to a house with a section of decorative stone wall at the front which i want rendered, there are some deep holes on the wall upto 40mm, is it possible to do as i am worried about shrinkage or cracking.
  16. J

    Advice on wall strength for lintel..

    It is...if i remove the patio doors from the extension and brick up the hole with a window in it, would i be able to cut back further on the house internal wall due to the fact that i would be supporting the lintel crossways from where i brick up the patio..?
  17. J

    Advice on wall strength for lintel..

    picture 2 under beam you can see the lintel
  18. J

    Advice on wall strength for lintel..

    I have just moved into a property that had a strange extension on the side and rear of the house but with no access other than through the old front door into the extension passage..I noticed today that in the lounge which the extension joins onto there was a studded partition so i ripped it out...
  19. J

    Extending concrete posts.

    Thanks for the replies.. first of all a pic so as to make things clearer.. The fence needs to be raised over 3 panels and the small block built wall on the left of the pic. The neighbour is happy with the plans and if needed he would write an agreement. Is this not the extender for...
  20. J

    Extending concrete posts.

    Hello all.. Could anyone advise me as to whether i can extend conrete fence posts at all..? I have fitted a raised decking area and the original 6ft fence needs to be raised by about another 2ft, only for about 4 panels width. I have the materials to make some panels fitted with a willow...
Back
Top