Search results

That was the rules under EU membership , we gave them up via brexit .

Short will be fine , bit same dimension as plug.

Routing of the vent is critical or condensation runs back to fan and can short it . In-line fan is more efficient when the vent route is fairly long as it clears more effectively. Run on after use is essential and needs to be 15-20mins. Some ceiling fans are dual speed so needs to be at fastest...

And none of the screw heads protrude from hinges .

Must have required channel through plinth .

Tiled wall is stronger than just plaster board , you can use ordinary wall plugs or these. https://share.google/JeiH1aUr06pQpHtdB

Wallpaper is fine , it does not trap damp , if walls are damp it will fall off .

Don’t need too , have used it externally for years without problem. It’s also used under water. Cyanoacrylate glue is also used frequently in aquascaping both freshwater and marine aquariums for the purpose of securing the rhizomes of live plants to pieces of wood or stone.

Moisture speeds setting once set its completely inert only solvents can dissolve it. Where did you obtain this false information?

We are all immigrants , only difference is time . Same old bullshit to divert the gullible from the real problems . Seems to be working for Trump too .

Foil tape.

Heaters have thermostats , they have to. Make ? model numbers ? Has to be on any electrical appliance .

No it can’t requires a solvent to dissolve , who told you that codswallop ?

No same spigot is fine , it simply has to come from above the spigot .

Hose needs to follow red route behind dishwasher into top of cupboard down to spigot.

You don’t need a longer hose , the mistake is in taking it down instead of up from the back of the machine so it enters thru the side of the cup , then down to spigot , you have plenty of hose to do that .

Depends on style/ thickness of splashback and upstand .

You could glue a couple in with decent adhesive .

Vertical timbers will have bricks between usually a single skin, very prone to cracking , I removed mine in previously property and replaced with new timber and ply face which was then clad .

Zinsser B-I-N Shellac-Based Primer Is one option