Search results

  1. T

    Which garage alarm??

    Hi all,could anyone recommend a garage alarm,only need one PIR and i might fit a door sensor. thanks Terry
  2. T

    BT Verve 500??

    Thinking of buying the Verve 500,has anyone got ant views on them,good or bad,or any recommendations on any other BT phone would be of great help. many thanks Terry
  3. T

    Garage Alarm??

    A while back,maybe wrong,in Maplins i saw a mains alarm extension where you plug an adapter inside the house,an then plug another in the garage,probably with a sensor,it then alarms the garage with probably a siren going off inside the house,is there such a device or have i got it wrong.Any info...
  4. T

    updating phones?

    got old BT Diverse2051,thinking of updating to the Diverse 6450,any feedback would be helpful,or are there better BT phones out there,had good reception with the old Diverse. Thanks Terry
  5. T

    help no response at keypad

    Thanks Saxondale,much appreciated,got it all back to normal now,blew the strobe fuse,had to pick some up from Maplins,switched off mains ,disconnected internal battery for 5or 6 seconds,all ok,keyboard back to life. Thanks again Terry
  6. T

    help no response at keypad

    Hi Saxondale,could you explain for me BOTH power feeds,as i explained i only disconnected the plus on the panel for zone 3. many thanks Terry
  7. T

    help no response at keypad

    just changed a pir,the bellbox went off as i was replacing it,that stopped after 15mins,now i have no response on the keypad,the only light on is Tamper,also the keypad is still illuminated as usual,have i blown a fuse or something? Terry p.s not sure if the strobe was on when the bell...
  8. T

    Help Changing PIR

    thanks saxon.joe. Terry
  9. T

    Tiling a garage floor?

    Is it possible to tile a garage floor,if so do i need special tiles,cement ect,only used for parking car,obviously i dont want the tiles to crack. Many thanks Terry
  10. T

    Help Changing PIR

    i need to change a PIR,can i just disconnect and replace the new unit in the Engineers Mode or do i have to shut the alarm down completely. many thanks Terry
  11. T

    Plain ceiling paper

    I want to put plain wallpaper on my ceilings,can i use a heavy duty(120g)lining paper or are there other papers i should use. many thanks Terry
  12. T

    tiling garage floor?

    advice required,type of tile,preperation,do i need a special adhesive or sand and cement,occasionally jack up car,axle stands ect.not sure if i can get away with tiles but maybe some kind of paving. many thanks Terry
  13. T

    Cementing over old garage base?

    detached garage no DPM floor solid,breaking up in the odd places(jack use) patched up over the years but base is sound Dont use it for mechanics anymore hoping to skim without it cracking,that is my main concern,only going to be used for parking and the odd repair,would like to have a nice...
  14. T

    Cementing over old garage base?

    Would it be possible to reskim on old garage floor,hoping to lay down a new base of cement about an inch thick hopefully,not sure if the if the new base will crack,only vehile parking use,or do i ned to prep the old base somehow. many thanks Terry
  15. T

    two rads cold?

    one upstairs and one down,both cold,all the rest ok,i have bleed the 2 rads, many thanks Terry
  16. T

    carpet grippers?

    How close do i need to fit the gripper to the skirting board,do they butt up or do i leave a clearance,also do i use double sided tape for concete around the fire place,dont really want to nail or screw,or is there a special tape i need to use. many thanks Terry
  17. T

    wallpaper stores?

    does anybody know of any wallpaper stores/warehouse with a good selection ,rather than searching through all the paper books,prefably west of london(heathrow)and south. many thanks Terry
  18. T

    Honeywell ST6400C programmer problem

    is it advisable to disconect the mains or can i just lift the front off. many thanks Terry
  19. T

    Honeywell ST6400C programmer problem

    thanks for the quick response,pick new unit up tomorrow. thanks again Terry
  20. T

    Honeywell ST6400C programmer problem

    when the heating and water is on(both red lights on to confirm)i've only got to slightly touch th unit or pull the flap down and the unit makes a single click and the heating light goes out,water light stays on,could this be a bad connection or faulty unit? many thanks Terry
Back
Top