Search results

I'm with you Foxhole trying to empty through the inlet hole would be a pia,buy my bags off Amazon ,slit the end open when full and reseal.Can normally get about 4 goes at that before using a new one ,no use spending money that you don't need to.

CBA

Plenty of opinions on here

Religious=delusional

I had great results from using the water based Zinsser 123 bullseye.Which was rollered over oak kitchen cabinet doors ,then I used Bedec's Multi surface paint.Here's the result.....

Just done that and your right,thanks for the explanation.

Have you got your accounts synced?

Can somebody please explain how this is a twinthread screw because I only see one thread?

A bit of emery cloth on the rods should take it down enough.

Halfords professional or Wera.

JB Weld SteelStik™ sets in 3-5 minutes and after 60 minutes, can be drilled, tapped, machined, ground, filed and painted. SteelStik™ cures to a dark grey color, is rated at a tensile strength of 4000 PSI and will withstand temperatures up to 300ºF

Pisa

Got plenty of time on my hands and sanding was quite enjoyable,kept me occupied.

I took my doors off and worked on them in the garage ,this was mainly because of the dust from sanding.I don't think rolling insitu would have been a problem as the paint goes on thinly with the roller so don't get any running.

I've nearly finished the revamp of my kitchen now, biggest job was tiling the floor because I wanted the tiles up to the edge and not just to kitchen units.Led tape lighting and tiling under the wall cabinets and I'm finished. Glad the info above might be useful.

Before I set about doing up my 80's style oak kitchen by painting all the units (can't afford new) I scoured the internet looking for what to use and how to use it and thought this might help other people. All the units were rubbed down using a range of sanding sponges 60/100/120 grit just...

Brilliant thanks for the replies,just need to make my mind up on where to get them from.I can't see the cheapo ones on Amazon being much cop?

Ok great ,thanks for the reply.

I'm looking to fit some led tape lights under my kitchen cabinets,I have a 7 ft stretch then I have my cooker and another 300 mm cabinet after the cooker.Instead of having two separate installations I have buried 20 mm oval conduit in the wall which is going to be tiled over and was thinking of...

As a side issue,if your fire stops misting and you suspect the transducer before buying one stick it in a kettle descaler for half an hour, worked a treat for ours.