Search results

We do,.when back at the house I will check my meter.

The two rads are in a previous extension which contains the 5th bedroom and ensuite. The rest of the additional space is downstairs in a large open plan area. 6 rads across five bedrooms, 5 towel rails across five bathrooms and one toilet, 1 upstairs hallway, 1 upstairs walk in wardrobe, Then 1...

Oh I see, it's 10c, i.e basically don't activate unless I have it set at 20c at the stated times. It will never get lower than 17/18, after I run the previously mentioned schedule.

The TRVs where we have them upstairs are normally on 3 i.e roughly 20c, we normally set upstairs to 20c until about 7pm and then leave it off apart from a little 30-40 min kick at 2am. That's when outside is approx 10c as it is now. The house also has 2 zones for upstairs and downstairs central...

I did do that about 9 months or so ago and worked to balance out the rads as suggested above, it seemed to be better in October but haven't had guests stay overnight in December. Been more distracted by the noise of the boiler which is somewhat noisy !

1930 house, cavity wall and about 150mm of insulation in the loft from memory

Hi all, I have a 5-bed, 4-bath house (1 master, 3 en-suite) plus a downstairs WC. It’s 270 sqm with 19 radiators. When the boiler was first fitted the house was 210 sqm, but was extended about 3 years ago and we bought it 16 months ago. The boiler is an 8-year-old Vaillant Ecofit Pure 630 (30...

Thank you, much appreciated.

Hi All, We are finally getting around to painting my toddlers room. We like Benjamin Moore - Timid White , but I know I can get this mixed up under any brand. I always used to go for Johnstones trade. Ultimately we want the flat look with a bit of durability given it's in a childs room. I...

Thanks I have seen that, it helps with the distortion level but unfortunately not the scale.

Hi All, We are having new windows fitted and need to choose the bathroom window glass design. We are between Arctic (which we already have) and Tribal. Two totally different patterns and slightly worried Tribal will look too fussy. It all depends on scale. Has anyone got a photo of tribal in...

The other devices are showing a signal, but I could walk test it as a double check. Agree it's weird, wonder if I clipped the learn button and it reset it. Seems unlikely though

I did and it didn't recognise it i.e 0 signal, seems like it's lost its registration to the panel or is just simply faulty. Thanks for the tip on how to install

They are I also just checked the signal in engineer mode and it seems both the shock and the MC elements are showing as zero signal, which tells me for some reason this sensor is not communicating with the panel. So I am thinking I should just delete it from the wireless device list, and both...

Hi, this is the photo of the PCB https://i.ibb.co/8D9kTbjb/Screenshot-20250128-190136.png

It stays red (1st led) regardless of the door being open/close however the third led at the end goes green or off when away/near the magnet . It doesn't reset with both tamper's pushed in

An update: 1) I found the "Utility" DT sensor with low battery and that code has cleared following a new battery being installed 2) I tested the tamper on the magnetic sensor and it doesn't seem to be the tamper as the light goes off when both tampers are pushed in. So I am thinking it isn't...

Thank you, I will check that. As I only saw the front tamper and when I clicked that, the lights reacted. It's odd, it's still holding the PIR tamper fault as well. I was wondering if the tampers don't clear until that "DT low battery" warning is resolved, I just need the time to go up on...

If you look at the top left of the door, you will see the door contact sensor, it's black so not easy to see. edit: I took a photo this morning.

I think because the installer decided that would cover the glass if anyone came through it or presumably if they got up there and started looking through that window. It does seem they were "creative" as they also strapped a PIR into the car footwell of the previous owners car, so it was linked...