Search results

Are you saying that the tap tails that usually come with taps are 1/2 BSP suitable for flat face connectors? If so you would think there would be spares available, just in case the dog chewed one (or whatever). I checked out a tap from Screwfix (item 5497T). And yes it says that it is supplied...

I spotted the B&Q one, its a bit long it would be all tangled. The Amazon one I didn't see. But I would still like to know why they aren't sold in conventional outlets of plumbing equipment.

I bought a new tap, it accepts a 10mm tap tail. I got the tap second-hand but it has never been fitted. The tails with it are copper tube and also there are tails with a plastic speedfit-like system. I want to have a plumber come and fit isolation valves under the sink on the tap feeds. I have...

Hi, I am looking to get a new kitchen sink and tap fitted. I’ve started to think that maybe I will deal with the worktop myself and get a plumber in to do something with the water before I start on the worktop and sink. My system has a cold water tank in the roof and a hot water tank which is...

Hi, I have an appointment to have a smartmeter fitted, but I think that my meter cupboard is too congested. Is this something that can be sorted by a local gas fitter, or are Scottish gas going to charge me a captive customer fee? If so, what might they charge? This is some info which AI dug...

The worktop will be either wood effect laminate or light grey speckled laminate. But the kitchen is full of mis-matching stuff and clutter. More of of a nightmare kitchen than a dream kitchen. My wife and I are of the opinion that it is a workroom not a fashion statement.

Do newer hobs always have clamp on all four sides? Many (all?) of them seem to have a speedfit system?

Thank you. I already have jigsaw with the old type of blade fitting (u-fitting) but would maybe buy a better saw to get a better selection of blades.

Too expensive. Plus there are tiles on the wall with pictures of bowls of fruit which would be cut in half because the upstand goes higher up the wall.

The gap is too big for that. Unless I put on two more layers of tiles....

Hi, I have a mixer tap in my kitchen which was white when it was new. Some of the paint has worn away exposing brass. So my idea is to remove all the white paint and I am wondering about the best way to do that. I gave it a wipe with fine steel wool soaked in white spirit, and also tried...

Not so easy to find a matching worktop at the right price. Plus it is a long cut to do without proper tools. I will be buying a jigsaw and downcut blades to do the sink cut-out. I have to put something between the wall and the worktop anyway. I can also get quarter round quadrant 17mm deep...

Hi, I am looking to replace a worktop in a kitchen. There will be a sink in the worktop. Washing machine and dishwasher underneath so a little bit of heat. No cooker or oven involved they are on a different wall. The existing worktop is 61cm deep. I have found a suitable worktop but it is...

I think the graphic seems to be saying that there is only one clamp. I haven't bought it yet so I can't check. In effect probably means that I have to change the worktop when changing from gas to electric? Unless I can: find an electric cooker with a more old fashioned way to fit it in...

Yes that sounds like it. Sorry I have been using terms that I don't understand. From a users point of view the idea is that if the cooker circuit blows something it won't be the fuse (which is near impossible to get out and hard to fix), it will just trip out a little switch which can be flipped...

He had a look at the RCD box in the picture below. He took the cover right off and it was kind of modular in there. To the left of the switches there was a vacant area, I think he is going to slot something in there. So when it is done I am supposing that right under where it says NHRS-204...

Can ask for some clarity about fitting an electric cooker to an existing hole. I have found a Beko cooker that is a little bigger than the gas cooker which is being removed. The Beko instructions for fitting it say that the hole should be certain sizes plus or minus 2mm. That seems...

Electrician came. All my sockets (the whole house plus the conservatory) are on the RCD. Lights have a fuse. Immersion heater has a fuse. Cooker socket has a fuse. Because all the sockets are on an RCD it seems to me that I am reasonably well protected. He is going to add another RCD for the...

The extra RCD only adds a tenner or so to the cost of the visit to fit the cooker. The electricians visit to investigate was free. He did mention that the whole thing with the old fuses could be replaced with RCDs but that would cost around £500.

There aren't any isolation valves, but I will make sure some are fitted.... He is defo a plumber, local old school guy who has done other work for me. Not thinking of doing it myself.