Search results

  1. P

    Rewire or not rewire?

    I mean bare earth wires running throughout the house through joists and back to cu. Is there part p in Northern Ireland or has it to be reported to building control? maybe prentice boy of derry may know? You'll have to wait to the weekend for pics as I'm working till then.
  2. P

    Rewire or not rewire?

    Doing some renovaions and when taking the ceillings down due to removing walls noticed that the house had bare earth wires running through it from the lighting circuits. I have planned to put a new cosumer unit in and get the meter moved. The house had ecomony 7 heating so was going to convert...
  3. P

    Building a fitted wardrobe

    Try Gliderobes.co.uk they are cheap, good quality and supply all you need including instructions on how to fit. You can get wood frames for the sides and top.
  4. P

    Speech Dialler help

    Does the anti code have to be used? I don't want to have to call texecom if I set the alarm off, Can the dialler be used to silence the alarm, what is the abort, set/unset terminals on the panel used for? Sorry for sounding stupid but the installation manual doesn't say much about connecting to...
  5. P

    Speech Dialler help

    Hi, I am installing a Texecom Veritas Excel panel, I also got a Texecom speech dialler (TSDT). I understand that the speech dialler has four trigger inputs for four different alarm types. What I don't understand is what the remote reset is? Can you reset the alarm over the phone? Is this...
  6. P

    Kitchen fitter

    What do the guys for the big kitchen companys do? The whole lot or just the kitchen units? Are there specialist people for solid stone worktops?
  7. P

    copper cylinder

    Just put a new bigger twin coil cylinder in and was wondering what to do with the old one. Its not a very old foam lagged 36x18, who could I sell it to and how much for?
  8. P

    Kitchen fitter

    Is there anyone who can do all those things? I have wired and plumbed a house from scratch and tiled and fit solid wood floors some evenings as homers but don't have any qualifications to do these things in paying customers houses. Is there some part time electrical course that would allow you...
  9. P

    Kitchen fitter

    Anybody any advice? I would like to get into kitchen fitting, currently I work for a furniture company and do everything from manage the warehouse, repair furniture to fitting built in sliding door robes. I have fitted a few kitchens for friends and family and don't find it difficult. The...
  10. P

    Alarm Cable

    I'll get alarm cable, how many wires 4 or 6, I liked the look of the texecom alarms.
  11. P

    Alarm Cable

    Can someone tell me if 3pair telephone cable is suitable to be used for alarm cable, I have floors lifted at the minute doing plumbing and would like to install an alarm sometime but thought I could run the cables now for future use. I have a 100m roll of telephone cable doing nothing.
  12. P

    Boiler stove linkup

    Can anyone tell me how much work would be involved in linking up a wood burning boiler stove to an existing oil fired heating system, the system is vented with a hot water cylinder and is fully pumped. I have 2 15mm pipes feeding the upstairs radiators and 2 22mm pipes feeding the hot water...
  13. P

    C27 programer

    Thanks Guys, I'll try the old time clock, It could be a coincidence that the valve give up at the same time.
  14. P

    C27 programer

    The system is fully pumped worchester bosch oil boiler, before I changed the clock the HW had to be swicthed on to fire the boiler, CH on its own did nothing , only open the valve to the radiators, there are no thermostats at all only trv's, the HW also heats the bathroom radiator. The system...
  15. P

    C27 programer

    HI Guys, I bought a new house and wanted to change the old time clock on the boiler to a c27 programer so I could have different settings for each day. There are no thermostats on the system just a 2 port valve which I think is a spring return. The boiler fires when I turn on the HW channel...
Back
Top