Search results

Yes the timber is stil there. He has just fixed teh plastic over the top. The soffits are there. but the bottom edge of that fascia board should be sitting up flush to the soffit? Is that right? Surely he would have needed to trim the fasias to make them fit. That's how it works? thanks

Hi all I just paid a roofer £950 to replace my soffits and fascia boards and guttering with new plastic. He said he would remove the old wooden ones, but I can still see them in the photo so I do not think he did what he said he would do. But please look at the photo. This is at the end of my...

Hi all I just paid a roofer £950 to replace my soffits and fascia boards and guttering with new plastic. He said he would remove the old wooden ones, but I can still see them in the photo so I do not think he did what he said he would do. But please look at the photo. This is at the end of my...

That's good enough for me John. I'll go with it. I will let you know how I get on. Thanks for advice.

The circles will be printed on and turned in plaques with quotes on that i sell. So really this needs to be a reliable method otherwise it wont be worth it. i sell about 50 a week at the moment. Do you think there will be much damage to the edges of the wood? Something that a quick sand...

Thanks John. The hole saw I am looking at is a solid one http://www.toolstation.com/shop/Power+Tool+Accessories/d80/Holesaws/sd1530/PUNK+BiMetal+Holesaw+/p28270 What do you mean by hole spacing problem? Thanks paul

Hi All I have an idea and don't know whether it will work. My first feeling is it won't. I need to cut out circular shapes in 3mm birch plywood. These are for decorative purposes. They cannot be painted and no holes can be filled. The circles will be approx 140mm diameter. I'm thinking...

if i used a fillet surely i would have nothing to butt the insulation to? flip it around and i have nothing to fix the trims to. thanks

hi all. would like some advise please. if i use celotex td3000 insualtion for a flat roof following these instructions http://www.just-insulation.com/celotexTD.html would i need to put a timber stop batten around the perimeter? and if so what size? thanks

thanks mattylad for the support. the roof in question is a ground floor FLAT ROOF that joins a pitched slate roof. i needed to remove the bottom slates to fit the new roof covering. i dont know what is wrong with homeinspector114. only thing i can think of is: saturday night, must have been...

hi. i am looking for a roof trim system that can follow a curved path. they need to bend vertically up and down. the roof is in the form of an 's' shape, the same as a roller coaster. the covering will be epdm. anybody seen or heard of such a product? thanks harry

Hi there. I am about to refurbish my flat foof with a fully adhered epdm membrane. But I also want to insulate as well. At the moment it has a fibreglass covering and i will be using kingspan 100mm. I know you can get special kingspan for this type of membrane, but you have to buy a...

Hi there. I need to remove the two bottom courses of slates from my roof. If I remove the first row with a slate ripper thats fine. how do you remove the next row down withour breaking the slates? do i have to use the ripper for the whole job? has anyone used the jenny twin clips to...