Search results

Well then boys and girls, here's the long awaited pictures. Pretty ey?

hehe that would be a good idea, except that I'm married - no such thing as romance any more! They might solve the other regular bathroom related problem she causes though :D

lol thanks for the support guys! I'm very aware how crap it is, but as I said I had to get the shower plumbed in sharp. May box it in with some uPVC or some such. I took a picture for your amusement, will post tomorrow.

Hello all. So, I had a very short time to get a shower plumbed in. I couldn't sink the pipes behind the wall because the genius that boarded the room out didn't batten it off despite my asking them to. In any case I ended up cutting a hole through the tap end of the acrylic bath, and...

ahh I see! It seems what I (and my family) have been referring to as lino is infact cushion floor. Is this a common mistake? I've never heard of cushionfloor before. The surface is just like this: http://www.patternimprintedconcrete.com/gallery/driveways/0004_100_0370.jpg.html To be...

cushionfloor's a new one on me - what is it?

Hello boys and girls. So I left my dad alone for 2 weeks during the refurb of a house which was to be rented out (and I've since bought for myself), and during these two weeks he was convinced by a rather dodgy bloke that it was a good idea to put down a pattern imprinted concrete floor - in...

cheers Matt, will have a goosey. Fitted a new pump today, when I finally got access to the old one I wired it in correctly (took pics, will upload - was horrific!). After rewiring it didn't pop the fuse but didn't seem to be shifting the water either and was getting very hot before the water...

Sorry matt my question was a bit ambiguous - I was unaware that a cap was used in control of the pump - what is its purpose in this case? This is new info to me is what I'm getting at, and i'm intruiged :)

not aware of any leak but this can be checked when I lift the board. matt1e - where is there a cap in the circuit? Also, your theory matched mine ref the limited current - I was thinking along the lines of maybe not all strands touching the head thereby limiting surface area cross section...

Don't forget Venturi showers - best DIY job I've ever done, it replaced a cheapo mixer shower (non-thermostatic) connected to mains cold and gravity hot.....by a professional plumber who didn't see fit to mention the fact that it would be more or less unuseable!

Thanks for the replies guys, pretty much what I thought really. However, having nipped to ASDA to stock up on 3amp fuses, I've discovered this. If I touch the switched live to the pump onto the screw head at the top of the terminal, the pump *seems* to run fine, certainly it makes a sound which...

Hi all. So this morning I got up to discover CH/HW was inop, discovered the 2 amp fuse in the wiring centre had popped. Purchased 2 more and replaced one in the hope it was a random thing. Went out, came back this evening to find it again gone. Put the other spare 2 amp in, to find out what...

@Dextrous - never worked with underground pipes before, how much of a p**s about is it? Already have a pressure washer so maybe if I get one of these drain jets that might keep on top of it... thanks for the info :) @Burnerman - Indeed it is! At first I thought it was just swilling around...

Hi - first of all, it cleared! It turns out repeated pummeling with only the rod end shifted it, must have been quite far long though as it took 13 rods to reach it. No others were affected. I have only 1 inspection cover / chamber between my house and the sewer. Having looked at the...

Hi Hugh, thanks for the reply I was aware of that rule, I spotted it when I was searching this forum ref this issue. However, given that the blockage isn't affecting any other properties in my terrace (as far as I know), doesn't that mean that the blockage must be in the pipe from my house...

Rod without attachment and a bit of attitude then! Having done some googling I've discovered that despite these things saying 'flushable and safe for septic tanks' they're clearly not. shame really cos they're a godsend at times (IBS!) Thanks for wishes of luck - I may need it! Merry...

I know, bloody typical isn't it. Its blocked a few times, I'm assuming partly due to it having quite a shallow slope? Am rodding away from house towards main sewer since the only inspection cover is about 50cm from the back of the house. Any particular technique to be used? Am pressing...

cheers mate, no other inspecation chamber unfortunately :( annoyingly its of an older type as well so there's just the gully (or whatever its called) and not the rod point above, so am going in at an angle just to make it that little bit harder. How much would DynoRod want to jet? am skint. . .

Morning all. I have a slight problem in that my sewer is blocked and having gone at it for 3 hours with the double worm screw at the end of rods and am getting nowhere. I *think* the blockage is caused by flushing Andrex Moist since I keep getting those in the worm screw. I've rotated with...