Search results

Sorry Wally, I didn't see your reply before I added mine. Many thanks for your reply! I appreciate it.

I've worked this out so thought I'd post to help others here. Either side of the main display panel there are two (well-hidden!) sliding doors that slide back to reveal the pressure gauge and the 'R' reset button. It's then just a case of topping up the water pressure using the filling loops...

How do I see what water pressure this boiler is at? There doesn't appear to be any pressure gauge for me to determine when it reaches 1 bar or not. (The full story: the boiler cut out with an F2 fault, which I believe is a system pressure fault. But without a pressure gauge on this unit I can't...

Hi tictic - the substrate will be 100mm of kingspan h350r - this is a completely waterproof insulation foam. I was going to lay the tiles on 50mm of concrete mix on top of the kingspan but the marmot would save me a lot of weight. What do you think?

I need to lay a small (6sqm) patio. I wondered if can lay my slate tiles directly onto Marmox or Wedi insulating backer board? I would like to do it this way because it's for a small roof terrace and I'd like to keep the weight down - if I can avoid using a mortar or cement bed I will save a...

Brilliant. That definitely looks like it will do the job... Thanks for all the help guys - much appreciated.

Thanks for the quick reply. I'm not really clear what a kinked lid is or MT1 - can you clarify? Great idea to make a midway hole. Thsnks again.

I want to put in some new lights in a part of my suspended ceiling - that parts easy. The nearest other lighting point to extend from is about 4m away. The ceiling is suspended plasterboard attached to a normal metal framing system so the metal purlins attached to the plasterboard cause an...

Blondini - Thanks - that makes things Crystal Clear. The reason I got confused was that I thought that the wires on the RHS terminals of the Krone box were connected to the some of the wiring on the LHS now that I know that they are not I can see that it doesn't matter what colours are...

Thanks Blondini - that makes sense. What are the G/W, W/G and O/W for on the RHS set of terminals for then?

I don't think I am explaining myself correctly - I want to know what the correct colour sequence of wires should be on the RHS terminal of the Krone box. The terminals in the Krone box are not numbered so I'd like to find out what coloured wire should be in positions 1,2 and 3 of the RH...

Jonnyboy - it's in a converted warehouse into residential. If it is meant for Business maybe that explains why the wiring is buggered up! The quality of the line is terrible and we want to rewire, I don't think that the previous installer used the correct wiring scheme. If we wanted to...

I see your point! Hopefully this pic should be bigger. What I am trying to figure out is if I was wiring everything afresh to a new Master socket which wires should go to which terminals in the Master Socket? I think that the wrong wires have been used previously. Note that the Drop...

Thanks, that partially answers my question but not the main part of it. I'd like to understand what each Position on the Terminal Box connects to. For example I think that - Position 1 W/G (on Terminal Box) connects to Input 2 on the Master Socket Position 2 G/W (on Terminal Box)...

Here is a photo of the wiring in my telephone junction box at the drop cable end - [/URL] [/img] I think that this wiring is not done to the standard colour scheme. Can anyone tell me - 1. What Terminals on the Master Socket should each Wire currently go to? e.g. White/Green connects...