Search results

This was perfect! These folk were amazing. I gave them full details of the valves (in the end I needed both hot and cold!) and the ones they recommended did the job perfectly - so many, many thanks once again for your excellent advice! #namaste

Hi Folks I have a dripping cold water tap - I removed the valve and it has a ceramic disc valve. Engraved on the side of it is SMR 01/16 If I google this I get metric valves returned in the search, but they seem to have different dimensions, and I'm concerned that I might order one that...

Hello I purchased a wooden wardrobe online and when it was delivered all four feet were damaged. One was completely broken off and the other feet were attached but cracked. The wardrobe was to match with other furniture and the supplier had no replacements so I went for the option of keeping...

Hello We have just had our bathroom floor tiled and the tiler removed the bath panel. The panel was originally stuck on but when it was removed the tiler said it should have been fixed with bath clips. After searching online I can't see any references to bath clips so my first question is...

Does the Triton have the water inlet on the top left & electric inlet on the top right? John 8)

Cable is 10mm & circuit protection is 45 amp Cheers John

Northern Ireland - the softest thing here is the water! :lol: Still Northern Ireland - no Wickes here! :(

Howdy Folks, my Creda electric shower finally croaked last night after giving us 12 months of trusted service & then 12 months of problematic service. I am keen to replace with an alternative manufacturer (Mira or Redring or your suggestion?), primarily because I don't consider 12-24...

Howdy! My Creda electric shower has just died (18 months old) & am looking towards replacing it. What electric shower would you recommend - & why? MTIA Soth 8)

Do I have to put all three wires in series or just run a spur from the rose & break the switched live? Now I have to build a second storey to my bungalow & a patio!!!!! :D This is getting worse! :D :D :D Soth 8)

If it would work I could live with that! Unfortunately, according to my other half they don't have "ambience"! :D Soth 8)

Very bad news indeed considering I've just shelled out £50 for this! :( :( :( :( :( :( :( :( :( :(

Hi Folks, I finally got one of these but I can't seem to get it wired up properly. All of the wires connected to the original switch are red!!! On the original switch there are two red wires into COMMON, one red wire into L1 & one red wire into L2. This PIR switch has three...

Hi Folks, my bank account is being plundered because neither my wife nor my kids seems able to turn off a light when they leave a room. In our office they have what look like PIRs connected to each light unit that power off the unit if their field is not broken within about 10 minutes...

I wasn't sure if lagging the ducting was a good idea but - given your suggestions - I will certainly give this a try as lagging is dirt cheap in B&Q at the mo! MT Soth 8-)

Hi Folks, I recently replaced our old shower enclosure extractor fan with a newer, more powerful fan in our roof space. The original fan had been left simply venting into the roof space. I hired a core drill & drilled through both pieces of the cavity wall & continued on with the...

Stainless steel (And thx for the good advice btw - it makes sense to me!) Soth 8)

Hi Folks, this is my first post on the forum - so please be gentle with me!!! :wink: There are metal 'pieces' on the worktop in my kitchen either side of the cooker. On one side this metal has started to lift (please see picture below). I was wondering what you would recommend...