Search results

I was looking through my Triton T80si installation manual last night (yes I got bored) :roll: and there is a table of recommended minimum and maximum ampages for 6mm and 10mm T&E. According to it, 6mm T&E cable, clipped onto a wall or through a cavity wall that is uninsulated can carry upto...

I've seen a few threads like this over the least few days, all the talk about 6mm and 10mm cable to 32/40amp fuses etc. Now I know nothing about electrics but it got me wondering what my supply was as we got someone to take out our old 7kW Triton T80 for a new 8.5kW T80si just over 3 months ago...

Our hot water is gravity fed, but the central heating is controlled by a seperate pump. Somebody recommended I back flush the system to push the air out back through the system?! Will this work, probably?

Hi, I don't know what the relevance of RS is, but I have just replaced my Wilo Gold 50 pump with the Wilo Gold RS50 and funnily enough it was from B&Q. :D

Hi I turned off my boiler today to drain down my central heating to fit a new pump, but now the boiler doesnt seem to be its usual self, it lights up for about 20 secs at a time and I have no hot water from the taps. The boiler is supposed to heat the water which is stored in a cylinder in my...

Thanks for the advice and yes, there are valves either side.

Thanks Chris! So if the pump still gets warm when I switch the Thermostat on, does that mean that the Pump is just probably jammed with sludge or something like that?

Hi guys, Well I've just been using the screwdriver theory in the pump after removing the screw and also having a small jug at hand, water is literally squirting out, but there is definately no movement. One thing I did notice though is that the pump head was still getting warm... I also...

That's great guys, thanks for your help.

Haha! that's a great method... :lol: I have touched the pump when the stat is ON but there is definately no vibration or any obvious movement.

OK! but this was more than a drip to be honest, it was almost squirting out so I quickly put the screw back in. Will try again!

Hi guys, I'm new today and know nothing about plumbing, so go easy! :wink: Anyway, my Thermostat isn't turning on my WILO 50 Pump for central heating which it normally does, so I was told it has probably jammed and to undo the nut on the front of the pump and check inside with a...