Search results

Brilliant that Gazman, thank you. I'll have a look at it when I get home later. Thanks again john

Hi, what i have on my back door is a self locking handle, whereas when the handle is pulled up, the door locks, the problem I have is my natural instinct when shutting a upvc door is to pull the handle up, locking the door and me out of the house. What I'm wondering is, can the self locking...

Hi all Are virgin boxes area specific, if so is there anyway to unlock them other than phoning v.m. If not, if I had to phone them, would they unlock it for me Thanks in advance John

Hi Kyrie First of all, I'd say that it is highy likley your cooker switch is wired in 6mm t&e cable as in all my years I've never known a cooker to be wired in anything above 6mm. If this is the case then then MCB (tripy thingy) in your consumer unit needs replacing with a 32 amp one...

I dont think so Tony, from what I can remember the led comes on when the heating is on or when it should be on.

cheers guys, it looks like what is happening is, when power is applied to the clock and it is switched manualy for a short period, ie to test, it works fine but when they are left on over night its as if the contacts of the time clock are being welded together. Its looking like a new clock and a...

Hi all Is there an issue with switching Son lamps with a time clock, I have 5 of them round a building which have stopped working, I assume its the time clock faulty but in a box above the fuse board there are another 2 (assuming faulty) time clocks, as if they have all at sometime or other...

Hi all I have the above boiler and the hot water works fine but the heating wont come on via the timer, all the settings are correct and the red led is on to say the heating should be on but the boiler wont fire, the only way I can get it on is by switching the boiler off at the mains then...

Thanks for all the helps fellas, its on and no leaks cheers again john

Just a quick 1, I am putting a tvr onto a rad and have a reducer, which bit of the reducer sits in the compression nut, the large or small bit. Thanks John

Hi everyone, does anyone know the best place to get shower wall boards from, I must have looked at 100's of web sites. Thanks John

Thanks for the advice, I have found the instructions on the net now but after reading some of the replys on here I think it might be getting unscrewed off the wall and have a look for a normal 1.. Do you know any good fire web sites?

No, its never been used but came minus the instructions which i have now found on the internet..

Ok, I think I need to straighten a few things out here, all I have done is screwed it to the wall, I am waiting for a corgi registered gas fitter who is a mate to come and connect it up, secondly, I am asking if I need a vent so I can get it in and done before he gets here as we are starting to...

Hi, I've just put a flueless fire in my living room and i'm unsure if I need an air brick putting in as I don't have the instructions, all I know is on the box it says I need purpous ventilation of at least 100cm2, can anyone help? Thanks in advance John Right, first off thanks for all the...

Hi all Got a beko fridge freezer which was transported on its side, i have been told when this is done the fridge needs to be stood unplugged for 24hrs due to something to do with the gas in them.. Having done this and now plugged in it seams to be working fine but does make quite a noise, i...