Search results

Hi Zipper many thanks for this. If i dont replace the bearing then the machine will beworhless soon. Its only starting to make noise so i have no choice. Im a gas installer and not bad with gas boilers but not looking forward to it. I might ask someone local to do it. Many thanks once again...

Hi Zipper E-NR. WFX 148SGB /20 FD 8509 700397 Hope this helps Many thanks

Hi all i have the above machine with a bearing in the drum gone. When we bought the machine the same problem happened. There service engineer came out and replaced the complete drum. Can the bearing be changed or do you have to replace the complete drum. Any help would be great. Tommy

From my spares department of course under very lucky...................................................................... Infored the customer in my i was fairly sure it was the PCB as i could see nothing else wrong. Repalaced it about two weeks ago and perfect. I dont like putting information...

Replaced PCb perfect

Hi all im an RGI in ireland. I am working on the above boiler. Water pressure switch ok, circ pump running teh air pressure switch flashes. There is no power going to the fan. Possible PCB but im not sure. Any ideas or thoufhts would be great!

Hi All worcester 24i RSF LPG boiler in a holiday home. Have been out three times now and every time ai call it works perfect. Have the customer making a list. Circ pump comes on, fan runs no spark but fan keeps running. When i call the pressure swich is switching fine and holding perfect. Any...

Hi all warning light flashes on boiler the nstops and boiler keeps going.No reset needed.!!!!! No instructions for boiler so would love to get a set as a lot of them in my area

Done all i could with this boiler and all pointed to PCB. Replaced it and worked perfect. Expensive repair

The probes dont look to bad but the flame only stays lit for one to two seconds so its hard to get a reading in this time

Hi all have come accross this boiler. Wont light so i was called out to it. It lit perfect for ten times. Then flame lights for about one to two seconds, then tries to relight three more times then lock out. Iv Checked the electrodes flame rectification probe and while they are defo worn iv...

I second that. A landline is a must in any business. Also when we got ours designed our address was used. I mean no point in driving 100miles to repair something small. If people know you live in the area they tend to save your no. Another point is friends family and neighbours harge them 50%...

Sorry lads had to replace PCB four days ago. Boiler going fine since and no problems. The sepplier keeps PCB for this boiler in stock all the time. Not a good sign!!!!!!

A spade connection behide the control panel. Re done it and its going fine. Maybe not pcb after all

check the pressure in the system. On some old boilers the burner may light on low pressure. The pressure should be about 1 bar

Yeah they seem in gor order, fairly new boiler and not over used. Found much the same on //www.diynot.com/forums/viewtopic.php?t=151503

Hi all the boiler works perfect most of the time and then the light comes on code 60 which means the ionisation pcb faulty. Why will it work sometimes only. By the time i call to check it its goinf ok. When it locks out it may stay that way for 24 hrs and then work fine. This happens on both hot...

Having a Problem getting gas to this boiler. The gas people have now said it could be a while. Would like to run on lpg for that term. Not having any joy so will have to wait. Many thanks for reply

hi all anyone converted a megaflow condensing 24kw boiler to lpg. curious

hi all the problem with this boiler was the ignition pcb board. Replaced it and it worked fine. I really dont like boilers with two pcb's. Boiler going fine since