Bosch exxcell 1400 s express

[tommygas]

Hi all i have the above machine with a bearing in the drum gone. When we bought the machine the same problem happened. There service engineer came out and replaced the complete drum. Can the bearing be changed or do you have to replace the complete drum.
Any help would be great.

Tommy

 

[muggles]

Sounds like a washing machine to me. This is plumbing, not appliances, wrong forum I'm afraid!

 

[zipper]

Post the "E-number" on the door sticker & we'll tell you.

 

[tommygas]

Hi Zipper E-NR. WFX 148SGB /20 FD 8509 700397


Hope this helps
Many thanks

 

[zipper]

A bearing kit is available for this machine (it doesn't have a welded drum) http://www.espares.co.uk/parts?k=181927 But I should also mention that it is a time consuming & god awful job to do. If you decide to DIY it make sure the drum spider/shaft isn't damaged. Type the E-number in here for constructional drawings http://www.bosch-eshop.com/eshop/bosch/gb/sparepartsearch1.htm

 

[tommygas]

Hi Zipper many thanks for this. If i dont replace the bearing then the machine will beworhless soon. Its only starting to make noise so i have no choice. Im a gas installer and not bad with gas boilers but not looking forward to it. I might ask someone local to do it.

Many thanks once again


Regards

Tommy