Search results

Yeah, I tried that earlier and an absolute nightmare, started to cause too much damage so stopped. Looks like I might have enough room to lift up the console a bit and get my hand under and then somehow unplug and replug the new one blind. Cheers Ford! Crazy they just couldn’t run the cable...

Thanks, what completely out? I know there is 2 screws at the front and back. Do you think I can just lift it up a bit rather than remove it. Why on earth did they just not put a bit of slack on the cable!

Hi, Spilt tea on the USB port in my Fiesta 2017 new shape, not been working for a week now. Thought I would just remove it and get the part number, however upon popping it out the cables are so tight you can’t even get to it. Started trying to hack the plastic open but stopped myself. Can just...

Also what type of screws should be used to fit hinges to upvc windows. Self tapping? Thanks

thanks, yes I am. if the hinges need replacing and as there isn’t anything to screw into as they as they have already had screws in there, is it acceptable for them to use longer screws to hit the reinforcing in the window. Thanks again.

Any advice would really be appreciated, thanks all.

@crank39 Sorry, just wondered if you had any advice regarding the above? . Many thanks

Hi just wondered if anyone had any advice on the above? Thanks

Many thanks, its 6mm plastic beading round the sides, top and bottom, is that what you mean when you say plaster line, I see what you mean about the frame, I assumed that was my dodgy walls causing it but from what your saying they should have had a smaller window to allow an extra 15/20 mm on...

Many thanks, sorry one last question, if the cams are hitting the bottom and middle keeps, are they adjustable up and down or is it only in and out?

Many thanks, Is it likely then that they put the dummy sash in first and didn’t realise and just got lazy and screwed through the other side? Sorry how do the windows normally arrive before install, i assume they are just the bare frame and then they put the dummy sash and then the hinged sash...

No, the screws are screwed from the central pillar but into the left hand side window. They haven’t broken thought just though it was strange as obviously they are screwed in around the frame but wondered why they are screwed into each other? 3 windows fitted and only one as screws into the...

Screws are on the ones where the arrows are going into the left window. Thanks

Screws are on the ones where the arrows are going into the left window. Thanks

does this help ? Thanks

Does this help, thanks

Hi, Just checking, is normal for windows to have screws on the keep side going into the other window? See photos attached. Also, is it possible to adjust the cams up or down or is it only in or out? Many thanks

I won’t be installing the shower enclosure myself but is it ok to silicone just this bit myself before it’s installed? Many thanks

Going to go for these: https://www.wolseley.co.uk/product/bulldog-2-trv---lockshield-valve-pack-8-10mm/?pid=250081 Seem ok. Thanks

Many thanks, for the towel rad i need angled valves. Also, would this be ok for the standard rad: I assume this is native 10mm and comes with a reducer to 8mm. so they will be fine for my 10mm? https://www.wolseley.co.uk/product/bulldog-2-trv---lockshield-valve-pack-8-10mm/?pid=250081 Not...