Search results

just laid a granite paving patio appox 50 sq mts,,, its now ready to fill the joints,,, looked at a wicks wash in groute,,, or not sure should i take the sand and cement route ,,,, the granite pavers are silver gray 600x600 approx 25mm thick,,,5mm joints any advice which way to go i have also...

i have placed my order,,, had no problem ,, in the real world there not so petty lol

thanks some good tips that would not have known,,, is the SRB to stop staining ?the color i have coming is a light gray ive never worked with granit so any advice is welcome

the size of the pavers is 600x600 and 20mm thick

i will be laying some granit paving soon ,, the area is approx 40 m2 it was built up approx 2 years ago from rubble roof tiles etc the depth is 600mm the wacker plate just bounces about and nothing seems to sink,,, ive looked around and it seems the granit is layed on a dryish mix of sharp...

crossed my mind TAY7,,, not to certain how it would look though,, i can not remember seeing a wall hung side feed towel rail

looking for a side entry towel rail ,,, by this i mean the connections enter as i a conventional rad,,, also it needs to be wall hung,,,, i know there are floor standing ones but they enter on the inside of the rad ,,,,,, any clues who stock these ???? its size is 600mm x 1200mm the...

thanks Dean at last some constructive feed back,, have to agree with you,, i dont often get involved with showers this is more a loss leader for a old customer,,, i think i know the make of it now,,,,, but think i will be leaving the job with somone who as more time on there hands

come on .. any one who claims to work on showers should know from the inside what this is ,,, i put it on here as theres a few who claim to know every thing...all i need is the name

need the name or make of this shower it has a drip on the hex nut marked H and L may be just a seal but its built in and theres no isolation valves possible an easy job but if it go, s pear shape it will be a night mare

not to sure im i n the correct place but most here have wacka plates,, ive been given a wacka when i remove the big nut on top of the viberater it appears dry so what oil do i fill it with ? and how do i know the correct level? the maker is COMPACTING EQUITMENT LEMMINGTON SPA but googling...

thanks mr helpfull you are correct ,, and raise some good points,, i had to make a frame in the end and purchased i oak door from b q i had dificulty with the door size but managed to get a 32x 80 reduced to 31 5/8 x 79 i contacted B C who say wood is ok and only if it had glass in...

seen a few wooden doors we like,, and a wooden frame,,, so can these satisfie building control one has a small double glazed widow 300mmx 100mm,,, is the frame just weather sealed ?

im fitting a new door and window soon,,, and been looking at cavity closers,,, as i have a few sheets of kingspan in 100mm 25mm etc left over is the any reason i cant cut these and use these to close the cavity? will they be as good ,,,, the walls are filled with 100mm of insulation

will be ordering a external frount door soon my brick work opening is 900x 2.100,, and would like a wooden door and wooden frame ,,there seems to be differant frame thickesses,,, so as a guide what is the ideal door size and what would the largest door i could get in,,

thanks jeds the exsiting house is soild floors ,,, but he may have not been aware of that

yes woody hes a 62 year old bricklayer been doing it all his life,,, thats why i had second thoughts if what i was about to do was correct,, as im a plumber i suspected that i was in the wrong,, just go to show allways check advice,,, thanks both for the replys i prefer the wood floor for...

I would like to raise the floor on 2x2 and 22mm ply I have done this on a previose extension but was told by a mate I should have ventilated ?

my new extension needs to have the floor compleated,,, up to now it as mot,,visqeen,, 4 inch kingspan,, then 6 inch of conceat all passed by building control,, i now need to finish it by bringing it up approx 3 inch which i can by boarding it over with ply or chipboard ,,, can i do this ,,, or...

my new extension needs to have the floor compleated,,, up to now it as mot,,visqeen,, 4 inch kingspan,, then 6 inch of conceat all passed by building control,, i now need to finish it by bringing it up approx 3 inch which i can by boarding it over with ply or chipboard ,,, can i do this ,,, or...