Search results

Thanks Bernard! Almost certain you have found the problem. The water level in the toilet is too high (not high enough to overflow). There is a slight flow back into the bowl via the siphon so there is a small but constant refill going on. I'll lower the fill level :)

Hi Guys, I replaced the ball valve lever in my cold water tank as the constant dribbling was getting annoying. The old one clearly needed replacing. Anyway I tied up the new one last night as there was a slight dribble after about 15 minutes with the thought that I hadnt fixed it properly and...

Hi, I need to change the tap mechanism on bath but the thread on the nut is virtually non existent. Ive tried adjustables and sprayed with WD-40 too to try and loosen but it wont budge and adjustables keep slipping. The nut only has one slight edge other than that it is more or less circular...

Hi, Yes the handles are off and the larger nut is visable but is extremely stiff, so much so that it feels like it may snap in half if i turn them any harder. As for the system, the hot water comes from a combi boiler on the same level (i live in a flat) and there is a cold tank in the loft...

Oh and yes all the other taps work just fine

Hi Dextrous, Thank you for your reply. I have been able to undo the plastic handles of the taps but taking off the small circular cover and un-screwing the screw. Ive been unable to turn the actual tap screw to get to the washers, I dont want to force it as im also having trouble turning the...

Hi, The hot tap for the bath and the cold tap for the sink have both stopped working. They both turn fully but only a tiny drip comes out. They are both situated in the same room. I would understand more if it was say both the hot taps that had stopped but one of each makes no sense to me.. HELP