Search results

how do i delete old posts.?

yes got it to 1bar,2 mins later 0 psi.

Thanks a lot guys for the info,ev was knacked had new one fitted with new prv also,now sweet at 1bar rising to 1.5 back to 1bar when cold,no leaks and a lot quieter. :D

had a problem with pressure fluctuation,with advice found to be exp vessel failure,got one on order with a new prv also. My q is what may have caused said failure,also i noticed the filling loop is on the flow side of circuit not the return.Will this affect performance.boiler is baxi 133he...

i have a old cast bath been reenamaled,changing the taps i have square holes inthe bath.the new taps are round3\4.flexi tap connectors fitted.the taps are not quite covering the ols square holes,therefore can drip below the bath.any help sorting this would be appreciated.thanks.

nearly as tall as me,was told i could fit 45A switch in the airing cupboard itself.can anyone confirm or deny this.or is it in violation of current laws.??

the cable would not be long enough to go into the ceiling for a pull switch,i could fit it outside the bathroom (on the landing area).but ill bet the kids will switch it off whilst in use.(litttle buggers).

the shower being fitted is a gainsborough 7.5 kw.

can i fit a 45a cooker switch in what was the airing cupboard to isolate the shower the other side of the airing cupboard wall.ie in the bathroom.although the airing cupboard is in the bathroom.is the cupboard in the bathroom.classed as the bathroom area.

yes they are.think ill leave it on the switched fused spur in the kitchen.thanks

thanks for the info,much appreciated.

the power for w/m is a fused spur the other side of bathroom wall in downstairs kitchen.could i put fused spur in bathroom.?

can i put a washing machine in my bathroom.

i think thats what they are;the old steel vertical type,think my best course would be to isolate the old rads,and replace when funds permit,many thanks for the info..incidentaly a lot of the old pipe work looks like its a galvanised configuration with copper joints,could you tell me the life...

boiler is baxi 24he.boiler seems fine in operation.

could anyone tell me why my radiator literally burst when i put the heating on.just replaced a old rad for a new one upstairs.slightly bigger.primed it bled it topped the combi up to approx 1 bar.i did turn the wall thermostat to max to test the system.within 2 minutes heard two loud bangs from...

quote="Heat4input";p="1953170"]try callibrating your mixer tried to alter control knob limits,ie it wont turn anymore even without the limiter in place.

got a thermostatic mixer valve..combi boiler,just not getting hot enough.hot water elsewhere is fine possible causes please.thanks

i have a vectra 1800 2000 plate,the drivers door window has come out of its guides/runners.can anyone please tell me the best way to get it all back in sync.thanks in anticipation.

in your opinion what would be a better option,must be dimmable.