Search results

Hi all, thanks for the help before. Got it connected to a spur. The electrician eded up doing it saying it was fine. The issue is now when the sanibest is flushed, on the third belch water seems to pump up into the sink and bath even though the plumber assures me that te bath waste only meets...

Only the toilet will be connected to the macerator. Bath and Basin have their own wastes going outside to the drain. the Sanibest will only take waste from the toilet. where should the spur or FCU go?

Thanks again. The electrics are all brand new, 2 years old. The risk of flooding, is that if the the actual spur or fcu is switched off or if the circuit from the fuse box is switched off? also, what's the difference between a regular Spur and an FCU...

the reason i'm asking is plumber says it should be ok on a socket and switch but electrician says he wants to run it through from the fuse box at an extra £150 if there is no danger in putting into a socket i will let plumber do it, but only if its actually safe

thank you for your reply. would that be the only reason? if so, the socket would be hidden or kept away from others or do you mean from the fusebox? it wouldn't be any sort of fire risk would it? as in, the load or anything?

Hi there, Just wondering is it ok to plug a sanibest macerator into a regular socket or does it have to be run on a separate circuit? I know ideally it should be on its own circuit but was wondering if there were any issues with putting it on a socket? Thanks Taareq

thanks, will try that tonight

Hi all, I have recently installed a bathroom basin mixer tap but the problem is the tap moves about. i have tightened the back nut when i installed the tap and it was fine for a couple of weeks but is now moving about quite a bit. I tried silicon on the base of the tap and the basin but...

the toilet/WC cold tap is the problem all other taps are fine. There is no tanks are fitted in the flat thanks

thanks all, i got a couple of these which did the trick...

for the flexi tube, would that part from B & Q be ok to use All pipes in the set up are 15mm

I put this in the DIY disasters forum, i appreciate that was probably not the best place to put it, but was hoping someone could help Thanks Hi there, Was undertaking some plumbing work over the weekend and have found that one of my compression fittings is leaky no matter how much i...

Hi there, Was undertaking some plumbing work over the weekend and have found that one of my compression fittings is leaky no matter how much i tighten it. i have a flexi pipe coming from the original copper pipe connected to a smaller copper pipe which then fits to the tap connector. its...

hi there, I have had this installed recently but its displaying "Com ERR". I have tried putting the thermostat bit next to the receiver and it still displays the error. i have checked the installtion site and it looks right. Sometimes when switching the boiler off and then on again it...