Search results

sip's are good for 4m span as my drawing, but its fitting the lantern in and how that will affect the structure.

I am looking at putting a flat roof with 2 x roof lanterns into a new extension. i like the idea of sip panels but not sure of span and load details as the diagram attached. i dont really want to have a 400mm+ thick roof i can help it. sip panels allow this if they will work. a standard warm...

flat roof extension

Not got buffer temp in the menu.

Where do I read the flue gas temp from? On the monitor?

done the whole balance radiators thing. working better, boiler is set to 60 now, and getting 56-57 on main temp. it is modulating now down to 2 so i think its probably working as well as it can. how can i check my buffer?

Hi all, i am having an issue i think!! i am burning about 1 tonne of pellets a month. (£300) 4 bed house with 11 rads boiler stat set to 70. water temp reaching 55 max got a cold house!! the rads aren't really warm, tried balancing them. getting better now, after opening all the...

and whats the best way to get rid of the limescale / blockage?

not had any work done, put up with the problem for about 3 years now!!! need to get it sorted though. if i block the vent pipe in the loft, where will the water go then?

Hi guys, the problem i am having is: the hot water barely flows, just a trickle but its hot! i have an immersion heater in a cupboard, a header tank in the attic. both the bathroom and the kitchen hot trickles, cold is fine. i connected the cold to the hot in the kitchen and forced the...

also going to try removing the springs and shortening the legs by 15mm too

1/4" collet extension would probably do the trick but at £30 kind of defy the objective of buying cheap table and router from ebay lol. so any ideas welcome!!!

hi guys, just got one of these tables and router from ebay. same problem!! i cant get the bit to come through the table far enough!! it must be something easy but i just cant figure it out?