Search results

Thanks Ken, Ceiling below and other side of wall are both fine, no cracks and wall appears stable. I was thinking of plasterboarding the lath, bonding the brick, taping the join and skimming the whole wall. I can't see how else I can get a flat wall, but I'm concerned this will crack. Any...

Hi all, this is my first post having spent hours reading and learning. I am renovating an upstairs bathroom and have taken all walls back to brick/timber frame with plan to dot and dab/refit plasterboard. My problem is one wall has lower half brick and upper half lath and plaster, see...

Thanks PrenticeBoyofDerry much appreciated; so wire a double socket from unit for both oven and hob it is. Oh, and I WILL cut out an inspection panel !

There were no fitting instructions, that's why I'm asking :) Connector unit could be accessed by cutting out back of cupboard which is fair enough but rather leave as is. Why what do you advise?

Thanks for quick reply. Only the hob has a plug. The oven has no cable at all so can I put a plug on the oven too and have a double socket wired to connector unit?

Hi all, I'm sure this is a groundhog day question but I just need clarity on fitting a new electric oven and gas hob. The old elec oven/gas hob was fitted into usual cooker radial circuit from consumer unit to control (with switch) then to connector unit. The kitchen units have been replaced...

Cheers londonboy and thanks for taking time to sort this. Worked a treat, just in time before the snow comes!

So I bought the Salus and this is the wiring diagram and connection plate on back of receiver, it's not same as current one so I can't plug in as-is which isn't a problem. Be great if someone could advice on wiring needed for this from boiler as in earlier photos. [/img]

Thanks all for help, much appreciated. I see now the earth isn't actually an earth, so will this baby do the trick ? http://cgi.ebay.co.uk/Salus-Digital-Wireless-Programmable-room-stat-RT500-RF-/130352519348?pt=UK_Home_Garden_Hearing_Cooling_Air&hash=item1e599d98b4#ht_3919wt_1137

Wow thanks for quick response although not quite what I wanted to hear. Its a single 4 core cable. Here's t'other end. Top is same, bottom is from boiler.

Hi I have a Baxi Bahama combi boiler that is wired to a frame for a wireless receiver for CH that has been removed an binned along with the thermostat, as picture shows. N blue, L brown, 2 Black (what is this?) and assuming 3 switch. Can anyone advise on what type of wireless...