Search results

handsey, I have just checked mine. Remove the batteries and behind the batteries at the top should be an arrow on either side with a picture of a screwdriver showing where to press up into where the arrows are. I never saw this last time!! press up where the arrows are and it should lift...

I'm thinking of getting the above hob which has one induction and 3 gas rings. According to the installation instructions, 2 brackets are screwed into the left and right sides of the cutout see here...

done it, couple of tabs needed pushing in above batt compartment thanks

tried lifting front up from bottom edge - not budging. Are there any catches that need releasing?

thanks I'll give it a go. will disconnect and note wiring

I need to remove the cm907 for papering around and then reconnect. I cannot see how to remove the front to access the wiring and remove? Looked under battery compartment but cannot see any obvious way of removing front panel can anyone help please? Thanks

Pretty obviously changing a stat is not going to affect individual radiators. In your case something has greatly affected the flow rate. Maybe he lowered the pump speed, partially closed a valve or anything else that has reduced the flow. If you complain long enough and hard enough then...

thanks for your reply. I'd rather stick with a service agent provided by the insurers. Would you have any idea what could be wrong with my CH? thanks

For the last year, we have had issues with our heating: We have an ideal standard boiler, nearly 15 yrs old, standard drayton lifestyle control timer, with a honeywell dgital thermostat in the hallway. In Jan, the boiler would not fire up, although the "flame indicator" on the honeywell was...

I have an ideal standard wall mounted boiler circa 13yrs old. During last winter we had a problem with the boiler taking ages to fire up on increasing the temp from the thermostat in the hallway. Some mornings, it would not fire up at all, so no heating or hot water. We called someone out and...