Search results

Thanks for all the advice, I think I will try a patch and if it does'nt work then it's a new sink.

Hi all, I noticed that I had a leak from the kitchen sink and upon investigation I discovered it was not the usual suspects but a pin hole in the sink itself. Is there any way that this can be repaired? Any help would be appreciated. Thank you

Yeh I know what you mean this hob has not worked for some time now and we just kept putting it off but now we are determined to get it sorted. We ordered a new thermomcouple and are waiting for delivery before contacting a gas safety engineer to get a quote to fix it.

Because you push the gas knob in and then press the ignition switch and it should stay lit but it goes out when you let go of the gas knob and this is the diagnosis that the British gas engineer gave

Ok thanks for that I will have a look now and see if I can get anyone to fit the new thermocouple. Thanks for the help

Thanks for the quick reply, believe it or not I asked British gas to come and give me a quote to fit a new thermomcouple and the engineer that they sent said he did not know how to strip the cooker down, so not quote given. I could not believe it

I have just ordered a new thermocouple for my stoves richmond mini range cooker because the smallest hob ring won't stay lit. I cannot find any instructions on how to dismantle the hob to get to the thermocouple, can anyone help with instructions please.

H. All, just thought I 'd let you know doorbell fitted and working fine, thanks for all the help.

Yeh we've had lots of wireless ones, should have got this one a long time ago, but hey that's life.

That's great thanks very much for that. Kind regards

Hi sparkwright, thanks for that, what you suggest is what I will be doing but would it be safe to use .50mm 2 core flex to the primary side of transformer as it is less than a 6 inch gap from the plug to the transformer. Many thanks

Yes that's the one, thank you so much for that,I'll get it fitted tomorrow. Many thanks

Thanks for the speedy reply, maybe I should explain a little better as it is the use of which wire that is confusing me as the wiring instructions on the chime and the wiring instructions on the transformer are different. I have used 50mm 2 core electric 240v cable to a 13amp plug with a 3amp...

Hi all, I have bought a doorbell, as above, and just want to confirm the wiring details as the instructions with the bell are not clear. Am I right in thinking that the transformer is wired to a 13 amp plug with a 3amp fuse, then run 240v cable up to the chime and then from the chime use...

Hi, Thanks very much for that, I'm off to get my pipe and nuts and olives and I'm sure all will be fitted soon. Many thanks

Hi, Thanks for that but as I am a complete novice I am not sure what you mean, is it possible to post a picture of the set up you are talking about on the 1/2" iron with a flat face. You are quite right the old tail was fitted to an isolation valve and I did think about taking it off but as you...

Hi, the old tail has a female nut that screws onto a male fitting but the new one has a male fitting on the end, here is a photo.

old one with female connection and new one with male connection

pictures show old and new tap tails