Search results

  1. L

    Texecom - Push Notifications

    yes the port forwarding works fine and I can access the panel on the WAN addresses. I meant regarding the random email delivery.......I can see the connections being made to texecom and I get the push notification however the emails often don't get delivered to me. I'm assuming once the panel...
  2. L

    Texecom - Push Notifications

    I have now set the "smart key app" with my internal IP so I can set the alarm when connected to the LAN. I have put my WAN address in the "keypad app" so I use that externally. I can see similar behavior with the notifications/emails........If I capture the traffic on my firewall I can see it...
  3. L

    Texecom - Push Notifications

    Hello, Thanks for the replys. I have managed to get the notifications working (now seems fairly reliable) my problem was down to the app on the phone! Hopefully this can help someone else................. I was using the "texecom smartkey app" which wasn't getting any notifications (even...
  4. L

    Texecom - Push Notifications

    Thanks for confirming. Is anyone able to advise on the push notifications................. I am getting the emails but no push notifications when doing a test call. I will try arming and setting it off when I get home later to see what happens. I have checked the phone settings and...
  5. L

    Texecom - Push Notifications

    Hello, I'm just in the process of setting up Push Notifications on my alarm panel. I have manged to get it to send me emails however I am not receiving any notifications on the App. Suspect its a phone/app issue? (Apple device) I am using the IP Com module for communications. Am I correct in...
  6. L

    Texecom Premier - Cant Clear A Tamper Fault

    Thanks Mark. I took a pic of the panel and have found the jumper your referring too, I will move it tomorrow! Thanks again :D
  7. L

    Program Wintex using IPCom

    Thanks for the reply guys, after adding the IP address to the account I was able to connect to the panel using the IP Com module. Thanks again Jim
  8. L

    Texecom Premier - Cant Clear A Tamper Fault

    Hello, I am in the process of configuring my panel and have got a tamper error that I cant clear! The keypad says: EXP 1,1 Tamper. I cant figure out which tamper it is moaning about? I'm using the Premier Elite 24 Live panel and have only got 2 ricochet devices, a keypad and pyronix...
  9. L

    Program Wintex using IPCom

    Thanks Mark. Was trying to figure it out last night and could only see the COM connection options and no where to put in the IP address! I have found it in the manual you have to edit the account, then under the panel details tab you can add an IP address and port. I will try it again...
  10. L

    Program Wintex using IPCom

    Hello, Am I able to program the panel using Wintex by connecting to the IP com module?? I'm using Wintex 6.21 with a premier Elite 24-live panel. Thanks in advance Jim
  11. L

    Texecom Premier Elite GER-0004 24-W Live + GSM/IP COM

    Another thought, could I have two keypads? Then put the control unit out of sight?
  12. L

    Texecom Premier Elite GER-0004 24-W Live + GSM/IP COM

    Thanks for the reply. Hmmmmm, that could be a slight problem! Seems to be a slight oversight by Texecom! Could I chop the lead and extend it? The other kits don't come with the wireless sounder so are going to work out more expensive.
  13. L

    Texecom Premier Elite GER-0004 24-W Live + GSM/IP COM

    Hello, Thanks for the replies......I don't want my PC on 24/7 so email alerts arnt an option! I have also have just realised to use the SmartKey App key it needs an IP address, to if using the GSM module it will need to be in GPRS mode which I believe in turn means I can't text it? If I...
  14. L

    Texecom Premier Elite GER-0004 24-W Live + GSM/IP COM

    Thanks for replying. To clarify, can I use a COM-IP and COM-GSM modules on the same panel? So really for arming / disarming using the app im better using the GSM module as that can also notify me of alerts via text?
  15. L

    Texecom Premier Elite GER-0004 24-W Live + GSM/IP COM

    Hello, I have just moved house and having left behind my Texecom Ricochet I want to fit another one! I was looking at buying the "Texecom Premier Elite GER-0004 24-W Live New Complete Kit" and have a couple of questions. Firstly I assume I can add an extra wired remote keypad? I am...
  16. L

    Texecom Premier Elite 24-W Kit - setup

    Hello, From what I remember when I fitted mine....I thought it came with the jumper but it was only across one pin? If you don't have one, could you use the jumper from the reed sensor temporarily? Yes you are correct, the device to be learned needs the jumper set on it, start the...
  17. L

    Texecom Premier + GSM + Nokia

    Thanks for that mate, just ordered it. Does the phone have to be a Nokia 6310i? Am I right in assuming the phone connects to the DLR-3P cable, which in turn connects to the Uni-com cable? Once connected will the alarm panel just see it as having the GSM module connected? Will you get...
  18. L

    Texecom Premier + GSM + Nokia

    yes please mate, that would be great if you could. So will i just have to buy a pc comm lead and modify it? Cheers
  19. L

    Texecom Premier + GSM + Nokia

    Hello I want to connect a GSM module up to my Premier 48 panel. "sparkymarka" suggested using a nokia 6310i with a unicom cable. Could anyone tell me where to get a texecom unicom lead? Also any instructions on how I go about connecting it up would be great! Thanks Jim
  20. L

    part setting texecom premier

    If the Landing PIR is on a separate zone then you can just use the Part Arms. Just turn off that zone for the chosen part arm, and name it Night Setting or something.
Back
Top