Search results

Thanks for the picture, that would be a possible solution with my design, how much effect on the efficiency on the fan would that have ?

Jockscott - Not got the cash for liquid cooling atm :( Aaron - i got AMD Radeon HD 7850 1GB GDDR5 Graphics Card Intel Core i5-3570K 3.40GHz (Ivy Bridge) CPU do play alot of games, sound is something im abit concered about thats why was looking into fan controllers to allow me to fine turn...

Hi people as you might of guessed from the title im attempting to building a desk which will enclose my pc tower so you will only see the monitor. as its going to be enclosed in say a wooden box. I'm planning to have 2 intake fans on one side 2 fans inside to help push air from one side to the...

Hi Rocks, i have checked the brushes already as i had seen someone post something similar in another topic, the brushes seem fine i removed and there's still plenty left and still good tension on the spring pushing it down

Hi guys, having some issues with my washing machine, downloaded a manual found my fault [F12] No communication between cards, check module connections.... Im guessing this is the card behind my control buttons start stop program select etc and the card on the bottom left next to the motor ...

Current situation put water on for a bath water was cold, checked pilot light on boiler was out, so followed instructions got it to light and again within 5 minits it went out tried to light again and soon as pulled finger of gas button after 20 seconds as by instruction light went out, Im...

Hi, im looking to get a better router, the main purpose will be gaming via xbox/pc both wired for obvious reasons. but ill also need wireless for laptop, phones and smart tv, but priority will be for gaming. will i benefit from a dual band router or is that more for ppl wanting good wireless...

just to confirm in case anyone has the same issue with battery dieing and not turn on until a day later etc... then changing the dock has fixed this issue for me...

Hi, My old iphone charger cable became loose but i still used it while waiting for my new charger. however before the new charger came my iphone battery died within 1 hour of being charged and would not turn on until the following day (im guessing maybe over heated?) so i got my self new charge...

Any idea where you would be able to buy a new board from, rather then changing the capacitors, as ive got little soldering exp

Ive recently modded my xbox 360 and now wish to add a LCD temp display, ive got a 12v 4 pin connect free inside the xbox i can use for power but my LCD display i fount and most LCD displays this size all require 5v, however i came across an adapter that can change 12v-5v made for LCD display but...

no :(

looks more like this.... and most of the top cas burnt of so cant read anythink, all i know is what it says next to it on the circuit board :(

im guessing schematics diagrams are not easy to come by then ive had a good look on net but not luck so far,.. i shall advise him to buy another one but if anyone knows where i could get a schematics diagram i still would like to have a go at fixing it , if only for my own experiance

my freinds dvd player broke and asked me to have a look, after opening the case i see the inside fuse had blown where the power cord comes in but also on that circuit board another small square shaped chip has blown above it on the circuit boards says IC3 i need to know , where i can find...

able to move lifters, but not actualy get them off :( is there any lil ways of taking them off??? ive put screwdrives in the holes of the lifters and tried pull them off but no luck, dont supose anybody knows the trick to get them off?

thanks again, these lifters... ive pulled them towards me and they move a lil bit but not sure how supost to come off?? do i need to pullit towards me till pops off or does it lift up?? having lil difficulty getting a lifter off :?

Thanks for the help, i looked inside with a tourch and saw some sort of wire, not 100% sure what it was but it was fully inside the drum, so simply pulling it out is not an option but i managed to push it out the way so its not scraping on the outside of the drum and now the noise has gone, but...