Search results

Got a new pcb from an ebay seller. Fitted the new part and the machine sprung into life. Unfortuantely it died after about 30 seconds. I removed the new PCB for inspection and it has blown in the same place! :-( I think enough is enough now and I've sunk enough money into buying a new...

Zipper, you truely know your stuff. Thanks to your encouragement I went back and got the thing out. You were bang on, the PCB is totally blown. See Pic : I'll send you a PM. Much appreciated. Scott.

£140, these boys know how to charge! Anyway I took the front panel off and no matter how many clips I fiddled with I could not get the PCB out to inspect it. I did find the supply to the heater though. I unplugged the supply and there was no sign of damage and no smell of anything burnt...

Hi Zipper, Thanks for the quick reply. I agree about about the reset, I had already tried holding it down for well over 30 secs before I posted. You might be onto something with your power theory. I just had to use standard insulated spades to reconnect the new element as the original...

This has turned out to be the bain of my life!!! After eventually getting the old element removed (the whole thing had shorted and melted everthing together so I had to cut the old element out and replace the spade connectors) I've now got it running again. However, it just keeps running and...

Zipper, Thanks for your reply. I dug out my multimeter today to test. Touching the probes to the terminal connectors gives me an audible continuity indication however when I switch the multimeter to check resistance it is measuring 0. I therefore assume that the element is knackered! Can...

Hi, After a right fight with the bloody thing I've managed to get the machine out and remove the base. However I'm still not seeing anything that resembles the link in Rocks1 post. Rocks1 (or anyone), is the element linked to above the right one for this machine? I suspect that the...

Thanks for the quick replies guys. Leccy - I'm not 100% sure that it has failed. I'm just working on the 3 flashes error code. Could this indicate anything other than an element failure? Rocks - Your link is exactly the part I thought I needed to replace. I just thought that I would...

Hi, I can see from other posts in this forum that the element can be hard to find on this appliance. True to form I cannot see anything that looks like the heating elements shown on line. As this is an integrated appliance I have not managed to remove the dishwasher so I am trying to do...