Search results

i have worcester 28 i boiler and when i put central heating on it works fine after a few hours we turn it off and pressure drops and goes out overflow pipe so when we need hot water i have to top system up

i had to change my prv and found that my expansion vessel had gone ,can i fit a new one on either flow/return pipe,or is there anything else that needs fitting, my boiler is a worcester 24 i

my boiler keeps going to 3.5 bar when i run the heating and even when its been off all night the pressure is still reading 3 bar plus ,the filling loop is not connected does anyone know why this is happening thanks

does anyone know what angle the 15mm hot supply feed to the top of the cylinder should be to prevent airlocks,i am replacing a 2 foot cylinder to a newer version ,i know i can tee into the 22mm vent pipe but at what height above the cylinder do i tee off its a direct system no boiler or heating...

when i turn the hot tap on to run a bath one of the radioators gets pretty hot do i need a new diverter valve ,i have changed the diaphram but its made no difference thanks

sorry this is getting on my nerves got in touch with ideal tech team and they say the boiler is locking out because of an air lock ,if this is the case how did the boiler run for a while then lock out the next day

does anyone know why my boiler goes into shutdown ,had diaphram replaced in the diverter valve,when i tried to fire it up it stays on for a few seconds then shuts down,yesterday it stayed on for ages but this morning its staying on for a few seconds again could the ignition pcb be faulty

changed diaphram on this boiler when i tried to turn it on it fires up then cuts out after a few seconds ,any help appreciated

i had a steam shower fitted 2 yrs ago and all was fine but now i need to turn the knobs for the hot water fully to get it at a nice temp. its run off a combi,could the pressure equalising valve be faulty or the thermostat, any help appreciated

i have just taken over a business and have the swann cctv fitted model dvr4-1160 .i tried to rewind it as i had some trouble the other day and when i press the menu button nothing happens ,the remote we have is broken so i dont know what to do it has 4 cameras and on the screen its recording but...

i have a f+e tank in loft and a boiler i dont know the name of i keep having to get air out the system ,the hw cylinder has no stat on is there anything i can add to my system to cure it or do i need a professional in

my friend has a problem with his car when he goes a short distance, he can take the key out the ignition and the car will still run any ideas what the problem might be

could i test my pump by disconnecting my hot and cold feed to my shower and running the water through to see if the pump will work because the pump is only coming on if i disconnect the cold feed from the shower .weird as it sounds ,i want to know if its a faulty shower or pump

fitted one a couple of months ago ,its playing up sometimes no water will come through .i have a pump thats working fine ,the prob is i have to disconnect the cold feed to the shower and that starts the pump running and its fine for a bit then when i turn the shower on later it wont work unless...

i am fitting this pump for my shower i just wanted to know will it be ok to use 15mm pipe or does it have to be 22mm as i am restricted regarding space near my cylinder

looked inside my external box as advised and found the circuit board was scorched tried to get same box but cant find them anywhere maplins had the only one close to it but the wiring is different ,theres no name on the old one its got 4 screw holding the outer casing on and the bottom quarter...

every time i try the alarm the internal bell works but not the outside box what could cause this please help

just bought a light with pir for outside the house the instructions say to protect it with a independant 3 amp spur could i just plug it into a socket using a 3 amp fuse ?

when i turned my computer on it made a beeping sound like an alarm and it kept trying to start up but failed i give it a bang and the noise stopped and it was ok what could it be im baffled

ive turned hot water tap on and the water is coming out warm and sometimes cold any ideas please someone said the diaphram is split