Search results

Hi there. After some issues in my previous complete panel i replaced it and i have some issues. I have put three user codes but my system lets me use only the first code. Also i keep getting a gsm fail error. Is there something wrong with my panel?

I have replaced my panel but guess what my gsm gives me a gsm fail error. Am i miss something? Or my gsm-350 module is burnt also.How can i check to be completely sure?

I have turned it on without the gsm module and the board doesn't respond. Just a slight hm hm hm from the speakers. I have one extra panel in my store room. I quess i ll have to give it a try next week. Ahhhhh all this programming again from the begining.....

Do you think that i also damaged my gsm module?

So i ll have to buy a new panel.

After a misunderstanding with my cellular company i decided to change my gsm card for my powermax complete. But as i prove to be the stupidest person i know firstly i put wrongly my gsm module. After i turned on the alarm, the control panel was smelling burnt.I think i have destroyed it. I think...

I have adsl filter...

The strange thing is that if i disable voice alert and i have the land line connected i got calls not just sms from my gsm unit(i disabled the land line on my second floor since when i have it connected my broadband tv set signal is getting scrabbled, probably i need new wiring)

Hi there, i made the same question last year but now i need a solution since my telephone line is not anymore. I had a powermax complete system installed with the gsm module installed also. i have the installers code and i ve checked the installers manual but i can't find which settings do i...

ok im sorry it was not happened to me i just try to help a friend. that's all the info he gave me. it is ok thanx for the help.

he tried also with the fobs but no responding

ok everything ready and running thanx a lot. my friend with a powermax plus had a problem some days ago with an alarm that started while the panel was not in armed state and the panel was not letting him put his code to stop the alarm. is this possible? (he was trying to replace a battery in...

My friends i have to apologise because i didn't see the 2 lines in the manual that was saying that the detector disarms itself to save power.

I ll do it. but to mention that the first time i run the diagnostics all the sensors had excellent reception

i ve enrolled everything. I put to the walls and i was programming the panel. After that i run the diagnostics and all sensors were ok. then i run the walk in test and again they were ok. i left everything alone for about 20 and while i was sure that it was working properly i armed the system...

the strange is that i make a walk test and the diagnostics show everything ok but after 10 20 minutes i can;t communicate with all the sensors

well i ve put it in mains power i lost again two of my sensors. i ve deleted them and enrolled them again. they seem to lose signal but as i open their plastic cover they seem to be alive again

it says cpu low battery. and why am i losing connectivity with my wireless sensors

Hi there i just bought a powermax complete. i ve enrolled everything and everything works ok. But i worry because the trouble light stays on. I hope that this is because i was programming everything with the battery and i didn't connect the ac line on. Can somebody advice me. Thanx in advance

Is there anybody here who installed the powermax complete? What are their difficulties in installation. I have ordered one of those and i might need some help.