Search results

My H Wash&Dry won't start any cycles. The door clicks closed but whenever I try and run any wash cycle the padlock LED flashes and nothing happens. The interlock has been replaced but the problem persists. Any ideas appreciated! Thanks Model no: HD4106AMC/1-80...

Got a 7-year-old washing machine that just went through it's normal wash cycle but something must have happened midway through as I've opened the door and the washing is soaking wet, and the fabric softener is still in the drawer. I've tried running various cycles again and it completes the...

There's definitely water supply. I've managed to get it working after repeatedly pressing Start about 20 times

When I press start both the READY and WASH lights will be on but after a few seconds the WASH light begins to flash and nothing happens. Any idea what the problem could be? Thanks

The freezer compartment was a bit icy so I chipped out all the blocks, carefully, and afterwards I noticed the compartment had a gassy smell when I opened it. Now the fridge doesn't seem to be cold and the freezer is gradually cooling - things aren't as solid as they should be. Any ideas?

I ran the regular cycle and when it reached the rinse phase the light flashed red and I got an error beep. I couldn't do anything other than restart the machine and try the drain cycles but again, I get the error light and beep next to Rinse. So now my wet washing is stuck in there and I don't...

Update with new photos

That's a stock photo. I see the problem now - the clock hands don't move at all. The dial moves fine though but it still doesn't come on at the times indicated by the tappets.

Still no joy. Don't know how to set the time, and heating only comes on seemingly randomly. Now for example the switches are out but no heating. Tried the other two settings on the side switch and no luck. I know the boiler itself is working because I have managed to get the heating on on...

Cheers. But how do I set the time? I assume I use the arrow and the 24 hour markers, but then what do the actual clock hands signify, since they don't correspond. For example, when the 12 is aligned with the arrow, the clock hands are in the 3 o'clock position.

How to program it ;)

27-11 NEW PHOTOS: So here are actual photos of my thermostat and boiler. The stat seems to be working - clock displaying correct time etc with audible ticking, and yet no heating on any of the switch settings. All radiators are open. We have hot water but no heating, and what I assume...

I've already done that - nothing on the back either.

It has no make, model or serial no. anywhere and I can't figure out how to change anything other than the prog # and time and date. As it is, I figured the heating should be on right now, but it's not. Any ideas?

Yeah, I only recently discovered it was set like this - first cold weather in this particular flat. I figured as much. Thanks.

I have gas central heating and a battery powered wall timer/thermostat. I'm not sure how to set the timings on the thermostat - it's basically set so that the heating is on 24 hours according to that, but we just turn our radiators on or off at the valve as needed. Would this effect our...