Search results

  1. S

    Fireplace - what bricks

    Normal bricks and compo will be fine.
  2. S

    Laying solid Oak floor.

    In the next couple of months once I have the decorating finished in my lounge, I am planning on laying down a solid oak floor (engineered). So am doing a little planning. This is the situation: The floor is 2/3 tongue and grooved floorboards which are all in good nick and level. The other...
  3. S

    Mira Sport 10.8Kw

    Many thanks for you help on this - it is much appreciated :D
  4. S

    Mira Sport 10.8Kw

    Do they use the same holes and feed and electrical connection locations though though :wink:
  5. S

    Mira Sport 10.8Kw

    Just ran it without the hose attached and it is cycling through hot to cold with the overheat LED illuminating as it has being doing.
  6. S

    Mira Sport 10.8Kw

    I have now :D ...let me go and try it.
  7. S

    Mira Sport 10.8Kw

    Thanks for you help. Will look into the price for a new one then weight it up against the cost of a new shower.
  8. S

    Mira Sport 10.8Kw

    Thanks. I have just tried this on the Low setting. With the dial on the coldest setting there is more flow coming through the shower head, it decreases gradually as it is turned up to the hottest setting. The flow reduction seems very gradual and progressive as the temperature is adjusted.
  9. S

    Mira Sport 10.8Kw

    At the 2 O Clock position on Medium, the water is luke warm and just about bearable. Much after 2 O clock position it starts to cycle. On th hight position it does it from the 12 o clock position onwards. The low flow LED hasn't lit up at all and nothing else in the house is using any water...
  10. S

    Mira Sport 10.8Kw

    On the medium setting it seems to be fine if the temperature is kept before the 2 O Clock position. Anything after and it goes hot cold and the "overheat" illuminates. But obviously the shower is to cold to use.
  11. S

    Mira Sport 10.8Kw

    Yes issue is there on both Med and High.
  12. S

    Mira Sport 10.8Kw

    Right, well have just had the water off and checked the filter it is clean as a whistle. Stop cock open fully. I have removed the hose and checked that it isn't collapsed and it is fine. Removed the shower head and ran the shower and still the same issue. Any other ideas? Failing that I...
  13. S

    Mira Sport 10.8Kw

    Thank you both for your input. The stop cock is fully open, however I shall clean the filter, and run it with the head off and report back.
  14. S

    Do I need these walls/ceiling skimmed before painting?

    If money is an issue as you have said, why not just lining paper over the lot and paint it? If you leave a couple of MM gap between the seams, paint it then give the gap a fill with fine surface filler and sand it back then a couple of finishing coats of paint.
  15. S

    Mira Sport 10.8Kw

    Hi All, wondering if anybody can help. I have a Mira Sport 10.8Kw, the shower turns on and produces hot water. After a little while the "overheat" LED illuminates, the water gets very hot then very cold, the LED goes out and it is usable again for a bit and it keeps going through this cycle...
Back
Top