Search results

Hi, I am trying to help an elderly friend who says his combi boiler is not heating his hot water correctly. The information I have is that the radiators are all nice and hot as should be, but the water from the taps is just tepid. A heating engineer came by to "have a look" and says the heat...

It it against any regulations to connect a basin and shower waste into the 4" toilet soil pipe? All wastes will drop through the floor into a closet directly below the bathroom and be joined there before the 4" pipe exits the property, where it will then connect to the stack

I used tile adhesive and it worked very well, thanks.

I think that is probably what I need. I'll speak to the my local supplier. Thanks.

Thanks Moley, the water actually comes up into the shower tray.

I have my bath and shower on the same waste run. When the bath is emptied from full, due to the head of water above the shower tray level, some bath water bubbles up into the shower tray. I was going to fit an inline oneway valve to the shower waste run before it meets the bath waste. A...

I guess I would also then trowl some adhestive or s/c 5:1 mix to the bottom of the tray edges?

Thanks for the reply Ollski. Should I be using a dry mix and what thickness. At the moment the tray and edges are supported on the flat ply base. How can I apply it to support the edges of the tray as putting under the center portion will raise the tray off the ply base and leave the edges up in...

Hi, I am just in the final stages of fitting a quadrant shower tray. I had to raise it as I have a concrete floor. I built the platform level and have topped this with 18mm ply which supports the tray right up to the edges. When the tray is placed on top all is rock solid and level. So with the...