Search results

Thank you, I’ll try and post the project up at some point when I gather the pics together. Just doing the interior joinery at the moment. I think I might have a shot at packing the frame out as you suggest.

Thanks, I’m pretty committed on the frame, kicking myself a bit.

I was supplied a stable a door and frame, unhung. Softwood, outwards opening. It’s too small for the frame to the extent it just about latches and the door just overlaps the inside of the frame by around 5mm. It’s for a shepherds hut I’m building and doesn’t seem right lock is exposed etc. and...

I'm finishing off an oak framed porch which is sat on dwarf brick walls with a blockwork internal wall to form the cavity. I have a 20mm thick 200mm deep length of oak to sit on top of the block wall and bridge across the cavity to the oak frame. Apart from screwing and plugging into the top...

Also interested in help here, I've started to delve into the config settings in more detail but struggling to find the right fields.

OK, the solution was to go through the motions above, re-open the app and Sync the app back to the panel in general settings. Everything then appears. All appears to be working well.

Good thinking, I kicked myself when I realised I was installing a UART driver to get the telecom one to work, I had a lead in the cupboard!

At the moment the smartplug does seem to be a fail although interesting people are managing to use it. I have to say I'm very impressed with Connect so far, my family have started to use the alarm system.... All of my problems have been my own doing... which is often the case when a diyer is...

I'm making progress, now onto the toys.... I can't get the app to recognise the smartplugs. General Settings > Connect > + > OK > Learn mode > switch device on > name device > assign room..... As soon as I assign a room the application crashes (closes). When I go back into the app there is...

Mission success, relatively painless, even managed not having to relearn everything. The basics on the App work really well, there seems to be some instability in the more advanced functionality which causes it to shutdown if the wrong inputs are provided.

Thanks guys, I received a very quick response from Texecom, LS1 is the English language pack which I would have probably found out after a couple of attempts but I don't want to brick it...

I've just got around to this, it could be a dumb question but I've just loaded the flasher software and I have a choice of a number of .mot files. I can't find any reference to the naming convention. I have a Premier elite 48W. The most obvious is p48_V4_00_ but then I have options of 24_LS1...

Thanks appreciated... here goes.

Hi, I have a Premier Elite 48W Panel which seems now to be discontinued. I would like to install Texecom Connect Smartcom to upgrade my ComIP. Do I instal the v4.0 firmware PremierEliteFlasher_1_8_4_3_Setup.exe or the latest 4.02 PremierEliteFlasher_1_8_6_0_Setup.exe given my panel is now...

Briefly - elderly relative, kitted him out with a Kindle Fire so he can read bible and other things on magnifier that I upload when I visit. He can no longer see the screen and is asking about audio playback, he likes to select what he listens to but can't see very well and doesn't have...

See this thread, I got the lifeline 24, not cheap on an annual basis but works out of the box for all of the scenarios you describe. Good service. For your automation setup MiHome Energenie, I've not yet found a robust high quality system to do what you describe and I've had a few. Typically...

Have they got alert bracelets? It's a good start. I installed a descent alarm system, integrated it with alert bracelet, fire and flood sensors. Visitors all have a fob or code and the system notifies me of visitors etc. I have a IP cam integrated in the porch to monitor comings and goings...

Nice to see texecom moving onwards. Looking forward to flashing more projects :-)

Whilst I'm looking forward to texecom connect, I have to say the App has been flawless once I got it set up. Reliable notifications so far, although I have to say my expectations were pretty low. The main challenge it has is that it can't seem to cope with more than one instantiation of the app...