Search results

Hi all, Had a look through the search results but I have to admit I'd given up after 2 pages! Just want to know if anyone can confirm that Plume Management Kits can or cannot be fitted by a DIYer? As is often the case, there are conflicting comments on this and other forums. The...

Hi all, looking for a bit of advice. I have a switched socket (on a spur) underneath a worktop in the kitchen. It supplies the dishwasher and microwave. The microwave is on the worktop, dishwasher underneath, about 300mm away from the socket. The power cord for the microwave goes down the back...

Removed an old plate type electric cooker hob to replace with a new electric hob. Upon removal of this and the oven below, I have found a gas pipe running from under the floorboards up along the back of the wall with no support at all - the thing was bouncing all over the place! I have fixed...

New unit - 9.5kw @ 240v Electric shower. Existing shower was 7.5kw wired on 6mm2 to dedicated 40a MCB on CU via cord isolation. The bathroom is literally at the top of the stairs with consumer unit directly underneath. Total length of cable from CU to isolation would be about 5m and then...

Just after some advice please - installing own kitchen. No problems with base & wall carcasses, appliances etc - my main concern is the worktop. I have found plenty of info on this site and others however a lot of it is conflicting. So here is what I know, what I want answers to and what I...

Hi all, New poster to the forum but have learned lots on this site for various DIY tasks over the past 12 months or so. I've seen other similar posts regarding my query and also I note the Part P requirements (which I have a question about below). - I am removing an electric oven and...