Search results

Thanks Alastair

Thanks for the reply. I shall be cutting the 5 extra tiles needed and bedding in the verge and ridge tiles. He did offer but I said I don't mind doing it and previously did the same with my garage build using the same builder for the roofing. Is anyone aware of a paint that sticks to rubber...

It is rubber on the left. The other part towards the right could be lead but I'm not fussed about that. I just wanted to cover the rubber somehow. Thanks

We have used a general builder for our porch roof. The porch joins into the lounge roof and at the valley between the two there is some rubber dipping down. Can I paint it with white paint or trim it back or stick something over it? I've attached a pic for reference Thanks

Thanks for your help. I have a paddle mixer. Do I need a spiked roller?

I shall be putting in lintels and a apex roof. Probably another 3 courses of bricks above the window frame. The door frame is made of wood but is north facing so I guess that works in my favour. I shall improve the expansion gap and go from there. Thanks for your help

The pier is filled with concrete and 2 bits of 12mm rebar. Pier side is where the hinges shall be. Other side is latch and lock.

The foam has at minimum 6inches of concrete on top. The screed would be for final adjustment prior to fitting a laminate floor. I was also thinking self levelling compound but have never used it myself

I am building a porch and have a window butting up against the existing house wall and the new door frame. Should I allow a small gap for expansion or is it not required? I'm worried it might affect the rigidity although I shall be running a length of angle iron along the top inside from wall...

Yes I made sure the base was level. What is the minimum depth screed I can do, 20mm? Thanks

Thanks for your advice (y)

Thanks for your reply. Just to add this is the open cell foam a bit like an EPS sheet and not like the closed cell insulation stuff. Im not sure I can tread on this stuff without causing it to break unless I use a board to spread my weight and fill up half the area then move the board to do the...

I have some anti heave foam board left over from a recent project. This weekend I was going to concrete the new porch floor with around 8inches of concrete to get upto dpc. Would there be any advantages to throwing this board in and putting concrete on top? Thanks for your help

Out of interest can anyone recommend any good places online that sell upvc windows?

Thanks for the replies. Yes as I can't guarantee the spec it's best to buy new and save the hassle. It's a shame as there's alot of good used stuff about

Morning all, I see alot of used upvc windows in good condition. Would the older windows be upto the current regs? I understand it has to have a certain U value, 20mm gap between the glass and 4mm thickness if I understand correctly. I'm building an extension classed as a summer room (posh...

From a quick glance they look most similar to the dewalt battery fitting.

I want to buy an 18v to 240v inverter to use for power cuts and camping. I have an abundance of hawksmoor 18v batteries but unsure what fitment they are closest too? I see adapters used to fit different batteries onto different power tools but unsure where to start with identifying mine. Any...

Thanks for the reply John. The izys look good and not badly priced

Hi all I'm looking to buy my first petrol lawn mower soon. I'm a bit of a honda car fan so wanted to stick with honda ideally but am open to recommendations. My dad used to have a Mountfield and that seemed OK. I have electric mowers but they don't have enough grunt really. Thanks for any advice