Search results

HI If the laminate you are laying down , is the click and fix stuff try my easy way to lay it instead of following the instruction which say lay one board at a time and connect both the front and side of each plank as you go (spent many hours clicking getting one end of the line to...

Just thinking , it would a good way of getting a solid subfloor amd then i could glue the parquet blocks to it do you know if you can glue wood to this underlay

Hi all does anyone know if you can glue the woodfibre underlay boards to a concrete floor and then glue solid wood parquet to it iam thinking of doing it this way , as just lifted cheap laminet flooring from my house and the concrete floor instant really that level

Thanks i will do so do you reckon it would be a good idea to glue some of the parquet blocks into a brick pattern plank say say 3-4 blocks wide then install it like a hardwood plank floor

Thanks so much iam going to give it a go

if you could call them , that would be great iam thinking of laying them in a brick pattern , with maybe a 2 block wide board running at 90 degrees to the brick pattern ( but this is not essential ) thanks adam

THE BLOCKS ARE 30CM BY 5CM BY 1.8CM DEPTH I HAVE GOT 33 M2 TO DO

I have got 18mm ash tongue and groove iam thinking of getting the 3mm version i have a fairly new house 4years old with a concrete floor the floor is ok ish but not as level as it could be do you reckon i will need to put down normal thicker underlay first

Hi there has anyone used the Elastilon product ( one side adeshive underlay) to lay a floor with and if so is any good iam going to lay a ash parquet floor

hi all i have a very strange problem with my v reg corsa from time to time it will not start when it doesnt start , it sounds like i have a dead battery ie the starter motor doesnt kick in and if i jump start it , it will work but the battery is fine and starts the engine 99% of...

hi all i have a very strange problem with my v reg corsa from time to time it will not start when it doesnt start , it sounds like i have a dead battery ie the starter motor doesnt kick in and if i jump start it , it will work but the battery is fine and starts the engine 99% of the...

HI yeah i used this method on my conservatory floor we laid a concrete floor , but the bloody dog walked across it when it was semi dry leaving a nice trail of foot prints behind i put the sheets of poly down first and where there were ridges from the paw prints i bang the poly a...

Hi try 20mm or 25mm polystyrene, can get this from wicks its great insulation and as long as the peaks and troughs are not more than 25mm , you can bang the poly onto a trowle or ridge mark and it will squash over it

MOD please see item 1a

HI i have been cleaning some tar and paint off some hardwood blocks i have had to soak them over night in a thinned down solution of white spirit but a day later even thou the wood is clean it still smells do you know of any way of removal the spirit smell thanks adam

HI THERE The best way is to mark up on the reverse and cut from that side this applies both to hand sawing it and ripping it with a power saw also you can mark up the melamine side with masking tape that can improve the finish aswell

hi all just discovered an easier way to lay click and fix laimante flooring instead of following the instruction which say lay one board at a time and connect both the front and side of each plank as you go (spent many hours clicking getting one end of the line to click in for the other...

hi there cant help with first problem but if you have some off cuts of your floorboard laying around start sanding then down or cut them up and collect all the saw dust and mix with wood glue this makes a great filler and if you do it right , it cant be seen also if cut goes...

HI If its the stuff iam thinking , its blooding expensive its in b&q about £40 square metre its got a hdf base with what looks like glazed tile on top but could be lamiante with a very deep layer of glaze

Hi there there is one way around this i have seen it in a friends house it looks great run a border of the dark laminate say 1 board thick around the edge of your hallway then in fill the centre with the lighter laminate the finished look , is that you ment it to be that way all...