Search results

Thanks again for the help. I just went and got the coil and 10 minutes fitting later the boiler is working again. Infact it almost seems to be working better than it did before if that is possible, altho that may just be because its been a couple of days since iv had any heat. :)

Thanks guys, I checked that solenoid earlier tonite by removing it and placing a screwdriver inside it and turning the boiler on. The magnetic field was barely noticable inside the hole. I presume that if working properly the solenoid should be strong enough to hold a small screwdriver...

Do you know what the msla coil does? ie is it a heater or a solenoid. If it is not functioning would that stop the oil getting through the pump? Or is my problem more likely to be with a blockage in that silver L shape pipe? Thanks.

Hi, I noticed my heating wasnt working this morning. After quick investigation i found that the water pump on the boiler was working fine but the oil pump runs for about 10 secs then cuts out and you have to press the reset button to restart. I striped the system down to see if the jet was...

Yea i had bled the pump, but thanks anyway breezer. Was working on it all last nite and have finally got it sorted :D I took the furthest heater from the boiler off the wall and attached a hose to one of the pipes on the wall, ran it outside, turned on the pump and let it run for about...

I put some sludge remover liquid in my heating system because 2 of the radiators wernt working. I drained the system last nite to get rid of it, filled the tank and radiators and bled the radiators. Now when i turn on the heating none of the radiators warm up. The boiler seems to be...