Search results

Cheers for that. Got it right in my head now I think. Will give that a go when I get a bit of free time. No doubt I'll be back with more questions when I actually get started. Just one more thing. Do I have to go blue again due to the blue that's on our can I go black or grey instead

Thanks for that misterhelpful. Guessing my lack of diy skills are going to be tested with that one.. Will have a look into getting what I need then see how it goes when I have a free couple of days. How long should it take to do.. Other than the bottom the rest of the door is in good condition

there is no grey on show. the only colours i can see is the green and under that white, so guessing it is not down to the metal yet. Does that mean i wont need a primer then, just an undercoat on the white bits once i have sanded off the loose paint or will i just put the gloss on. Then an...

cheers for that john. Thought it might be something a bit different. Guessing I will have to get down to the diy shop and get some metal-preservative primer and paint. Will it be a case off sanding off all the loose paint, putting the primer on any of the bare white areas and then...

tried the magnet and it is metal. any idea where i go from here? Thanks

[/URL] [/img][/URL][/img]

thanks for the reply. will upload a picture from the front now.

Looking at painting my front door as I have noticed the paint flaking off at the bottom and want to get it sorted, however I am unsure how to approach it and was hoping for a bit of help. I think the front door is original to the house (about 18 years old). It has a blue top coat. However...

cheers for the reply. when you say blocked supply hoses do you mean the flex pipes at the rear. if so is it an easy fix which I can do with very limited knowledge or would it be a case of having to get somebody in to do it. cheers

I've tried to look through the forum and tried things that have been suggested but find myself stuck again and asking for help. Have a smiths ss5 plinth heater. looking at the smiths site believe it is the 12v model rather than the duel. The cold fan was working but not the heating aspect...

we now have a working oven..don't remember the display showing as being on auto but must have been that as gone through all the settings and they are now working. Will go and try the freezer now but haven't got the instructions for that so will have to get them downloaded. hopefully I can get...

as you can probably guess I am learning as I go with this one. the box was damaged for the wiring around the cylinder. he has replaced this with a new box and had to wire it in. not certain if he had to make any changes to the electrics but could wiring it back in cause the reverse polarity...

Hi ianmcd. no didn't tell him about it, to be honest forgot it was there as very rarely used it, the problem with that may have been there before but as I've noticed it since thought I would put it on. will have a look how to bleed it and get it done. like you say we cant work out how it...

squeaky.. you have no idea how happy you have made the wife...shower is now working fine, no need for a new pump now as originally told and can finally get a shower at home for the first time in 6 weeks. any ideas on the other stuff.

cheers for that.. will go and have a look and see if that does it. although I have a mixer shower rather than individual hot and cold so do I just turn it through hot and cold

Hi. just wondering if anybody could help as not certain if all these problems are connected or if I am just having a run of bad luck. Around 6 weeks ago I had a leak in my hot water cylinder which flooded through the ceiling. The system was drained down partially and isolated, leaving us with...

I don't want to tart the room up, there is paint hanging off the ceiling and black marks up the wall from condensation problems. As my mortgage will drop by nearly a third if I get the better ltv, even if the room drops the valuation only a little that could be a lot in the long run. In that...