Search results

Im currently training hence why I'm asking

Confusing myself now! And cant sort my head out. I have a junction box which seems to be a linker from replacing a pull chord switch to a rocker switch. Their are no other boxes i can locate. I cant take directly off the bathroom spotlights as they are in sealed units. So the bedroom to either...

Just traced the wires through but all roses seem to be like this

Thanks bernardgreen

Do i need to earth the switch as i only have 3 core in place or do i need to lace a new wire?

Thanks again doggit.

Thanks doggit could you tell me how to wire the switch please?

Hi guys Looking to wire up an extractor fan to an isolation switch. Im going to wire it from the bathroom light which only has a neutral, switched live and earth so will need to pull a permanant live off a different room rose. Can someone advise how to wire

This is correct from the socket(3 wires) to a junction box, then off to a single socket(for washing machine) and a double socket wire which looks as though it has been taken out of the junction box(disconnected wire)

It has 3 sets of wires and is 32A fused.

I don't know if is on the ring, can i tell anyhow? I cant get to the first double socket as its plastered behind the wall then comes out and is then into the junction box. The double socket that is currently not connected will be for maybe a kettle or toaster.

Thanks Winston the only other power supply i have accessible is the oven feed as these wires are under the kitchen counter. what other options do i have to get the unconnected double socket working?

Ok no problem thanks again

Thanks for your help i could probably connect everything up but i wouldn't know if the first double socket was on the ring final or not. If it is and just needs doing as you suggest what time/price should i be expecting quotes of?

Your right Im capable! Do i need to get someone in to put the fcu after the junction box? Do both spurs then go to the fcu? Like u say im not competent but want to know what im going to be asking to be done

Nope should i put one in?

All i have is a volt meter. Its just a single socket off of the junction box which has obviously been done for the washing machine as is right next to the inlets and waste pipe

Yes a cable of 3 wires. Would it be too much power consumption from a spur?

Hi everyone I just put a new washing machine in my kitchen and found an unconnected wire. Ive traced it as far as i can but wanted an opinion on what i need to do with it. I have a double socket on the wall with a wire coming out of it and into a junction box. Then from the junction box into a...

Thanks for the replies. The problems with writing sometimes i don't explain properly. I was trying to say did i need to wire up a new 'supply' but from the diagram i can see i just need to extend from the L and N from the rose in my pic to the new light. Thanks